I finally got to build and fly a pusher trainer

Started by PankajC, December 20, 2010, 11:33:48 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

PankajC

Well, last saturday was pure bliss. I had been scratch building (my own design) a pusher trainer to learn flying. Over the past few I had been testing the bird but somehow could not fly decently. I was taking off, but was turning without gaining height, so it was coming down. In all I made about 7-8 attempts, but even with all the crashing, the model has held on with some repairs.

This was till saturday, when a helpful flyer (Divay Puri) decided to be my mentor and trim the bird. He also managed to maiden the bird, before handling the controls back to me. The 3-4 mins that the bird was in the air, was pure bliss....


The bird has a wingspan of 40", length around 31" chord of 7.1" weighs all up about 550gm. The main fuse has a frame of 1" laminated biofoam with 2mm carbon rods. The wings and tail fins are 5mm biofoam

Well this pic was taken after the 5th attempt when I had to repair the wings as it had ripped from the screw holes.

Thanks Divay for making my day.

regards
Pankaj

Spektrum DX6i | EP Pusher Trainer | EP CUB |

PankajC

Some build pics

Spektrum DX6i | EP Pusher Trainer | EP CUB |

rajaram

RAJARAM SHENOY G

SunLikeStar

Congrajulations Pankaj, your bird looks great. Good design, what is the compartment under the wing for?

PankajC

Earlier, the tail was being designed like this, but was changed after the build when I realized that the 1" x 1" join was not providing enough rigidity to the tail section and that the tail was flexing. After which I made the tail section with a 6mm hollow carbon tube and stuck the tail fins there.

The battery is long enough for 3S1P 1600mAh, but I tested with a 1000mAh pack. The power is provided by a Towerpro combo from Hobbycity http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=4853

The chamber below holds the AR6200 twin receiver and the ESC. The battery goes is in the nose

Spektrum DX6i | EP Pusher Trainer | EP CUB |

anwar

Nice :)

Why is the linkage rod not going straight from the servo the elevator ?
Hangar : Please see my introduction.
RC India forum and me : About this forum.

PankajC

Anwar, I did not have a linkage connector, so I have created a Z in the middle to allow for any small correction in the pushrod length.
Spektrum DX6i | EP Pusher Trainer | EP CUB |

anwar

Thanks for the clarification.  Usually "V" bends are made for that purpose, and "Z" bends are for the ends to be locked into servo or control horns.

Please do post some videos :)
Hangar : Please see my introduction.
RC India forum and me : About this forum.

runik4

Hi!
Lenghti but Good efforts with level Best Result.       :salute: 
Congrates !!!  ;D

From where You get Prop ?    :headscratch:  What about its Size & Price??  :Rs:

sharlock

I always like pusher planes especially as a trainer airplane it keeps the motor safe.. & look very cool ;D

bmblb

Hi Pankaj.....looks neat. Have you flown it yet ?
"The Flight Of The Bumblebee"

medicineman1987

Hey, nice plane.. Looks neat enough to be a ARF :thumbsup: How have you given the wing its curvature?
"The day you stop playing with your toys is the day you start getting ready to die.."

FlySky 9x (with ER9x,  backlight mod &  dual module hack) | Futaba SkySport 4VF (with 5th channel hack) | Glidiator - scratchbuilt 60" electric glider | SkySurfer | Scratchbuilt Tricopter | FT Nutball |  .46 Glow trainer (electric conversion in progress)

divay99

#12
You are always welcome Pankaj.... I would be more than happy to stand by you and see you fly ... see you soon

Regards,
Divay Puri
Divay Puri
+91-98-119-63278
https://www.facebook.com/#!/groups/NOIDAAEROCLUB/
http://www.amai.in/noida.php
FUTABA T6EX|FUTABA 8FG|SEAGULL 40|SEAGULL FAIRCHILD -PT19|PIPER CUB - 90"|EDGE 540 EP TMPRO|YAK 54 .60| Mustang P51 .40|AXN FLOATER JET|HK Bixler|REACTOR 3D EP|U CAN DO 3D| Blitz SkySurfer|EDF Jet T-45 Goshawk|HK-450 GT PRO|Seagull PC-9 .91|Edge 540 20cc|Reactor 50cc|PC-9 30cc|SU 26 30cc|HK 450 GT|Hirobo Evo .50|MXSR 50cc|Tarot

CrazyPilot

Divay Sir has always been very helpful to all the flyers who come to our field including me. Thx
When you fly electric, fly clean, fly quiet, and fly safe!

divay99

Thank you Crazy... I can say the very same for you.... cheers !!! Oh btw ... dont forget to get the vaseline tommor.... Thanks
Divay Puri
+91-98-119-63278
https://www.facebook.com/#!/groups/NOIDAAEROCLUB/
http://www.amai.in/noida.php
FUTABA T6EX|FUTABA 8FG|SEAGULL 40|SEAGULL FAIRCHILD -PT19|PIPER CUB - 90"|EDGE 540 EP TMPRO|YAK 54 .60| Mustang P51 .40|AXN FLOATER JET|HK Bixler|REACTOR 3D EP|U CAN DO 3D| Blitz SkySurfer|EDF Jet T-45 Goshawk|HK-450 GT PRO|Seagull PC-9 .91|Edge 540 20cc|Reactor 50cc|PC-9 30cc|SU 26 30cc|HK 450 GT|Hirobo Evo .50|MXSR 50cc|Tarot

saurabhhsrivastavaa

Quote from: divay99 on December 24, 2010, 12:25:40 PM
Oh btw ... dont forget to get the vaseline tommor.... Thanks

Vaseline  >:D >:D >:D!!! Naughty Naughty !!!  >:D >:D >:D HA HA HA  :giggle:

Some things should be kept over PM  :giggle:
Cheers !!!
Saurabh
+91 7977382130

divay99

ahahahahah.... Saurabh... rubbing vaseline make the landings smoother.... ahahahahahah
Divay Puri
+91-98-119-63278
https://www.facebook.com/#!/groups/NOIDAAEROCLUB/
http://www.amai.in/noida.php
FUTABA T6EX|FUTABA 8FG|SEAGULL 40|SEAGULL FAIRCHILD -PT19|PIPER CUB - 90"|EDGE 540 EP TMPRO|YAK 54 .60| Mustang P51 .40|AXN FLOATER JET|HK Bixler|REACTOR 3D EP|U CAN DO 3D| Blitz SkySurfer|EDF Jet T-45 Goshawk|HK-450 GT PRO|Seagull PC-9 .91|Edge 540 20cc|Reactor 50cc|PC-9 30cc|SU 26 30cc|HK 450 GT|Hirobo Evo .50|MXSR 50cc|Tarot

PankajC

Since the field is no where is sight, wonder what kind of landings ;)
Spektrum DX6i | EP Pusher Trainer | EP CUB |

sandeepm

Fly high if you have good set of batteries.....!

divay99

fields are always the best for landings... the grass tickles the body... of the plane :) :) :)
Divay Puri
+91-98-119-63278
https://www.facebook.com/#!/groups/NOIDAAEROCLUB/
http://www.amai.in/noida.php
FUTABA T6EX|FUTABA 8FG|SEAGULL 40|SEAGULL FAIRCHILD -PT19|PIPER CUB - 90"|EDGE 540 EP TMPRO|YAK 54 .60| Mustang P51 .40|AXN FLOATER JET|HK Bixler|REACTOR 3D EP|U CAN DO 3D| Blitz SkySurfer|EDF Jet T-45 Goshawk|HK-450 GT PRO|Seagull PC-9 .91|Edge 540 20cc|Reactor 50cc|PC-9 30cc|SU 26 30cc|HK 450 GT|Hirobo Evo .50|MXSR 50cc|Tarot

anwar

Hangar : Please see my introduction.
RC India forum and me : About this forum.

PankajC

OK, some update on this build.

I have been flying this bird for sometime now. Flies nice and slow, in fact so slow that one can take a nap while the bird is in the sky. Decided to time the flight time. I am using a 3S1P 1000mAH battery. It gave me a good 15mins flying time with little bit of throttle management. The other thing was that I was practically flying with about 25-30% of throttle most of the time.

Spektrum DX6i | EP Pusher Trainer | EP CUB |

PankajC

Final update..... retiring this bird.
Reason? I was on settling things up for Sunday flying and slipped. Landed heavily on this one and the wing of the cub. The fuse broke in this and the wing in the cub....
Well back to the drawing board.....
Spektrum DX6i | EP Pusher Trainer | EP CUB |