Making my First SPAD Plane - Step by step

Started by sriharishine, January 30, 2010, 10:29:28 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

sriharishine

Hi to all RC Geeks,

I am a very beginner, I am starting my First SPAD Plane.

I have collected many Plans for making a SPAD plane, Now I want to choose the material that I am going to use to make my SPAD plane.

I have heard the following
1. BioFoam - What is this? Normally in which shop this will be available.
2. Depron - What is this? Cons and pros of this material?
3. Balsa wood
4. Carbon sheets

Please suggest me to choose a material and where to buy it in chennai?

I have tiled sheets of plan for making a Blu Bee of 42 ", Hope I am going to follow.

If anyone there to suggest me to choose a model/plan for a start up plane...

Regards
Srihari

anwar

There are detailed threads already on most of these (except may be carbon sheets, which are not commonly used for this purpose).

Please search the forum first (the "Search" option is in the main menu on top; http://www.rcindia.org/search ), just put in key words like "depron biofoam" and "biofoam chennai".   You should also consider the other commonly used material for making SPADs, that is "coro".  Again, search this forum, and read the existing material.  You will learn so much more than the responses you get on this thread.  Take your time and read up, it will certainly help you in the long term. I would urge you NOT to take shortcuts on this. 

Also read the beginner threads in the gems list at : http://www.rcindia.org/rc-india-forum/the-rc-india-gems/ .

The choice of material comes down to the plan you are building. Some plans are designed for foam (depron/biofoam), while others are for balsa alone, and yet others are for coro with some wood inside (like balsa or other types of wood). Searching for the name of the plan you have chosen on Google should tell you what people usually use to build it.

I will leave it to others about the choice of starter plans to build. But you should realize that there are already thread answering the exact same question, like this one :

http://www.rcindia.org/beginners-zone/what-is-the-simplest-foam-plane-design-for-beginners-to-build-from-scratch/

Hangar : Please see my introduction.
RC India forum and me : About this forum.

sriharishine

NOTE TO ANWAR[Admin]:

OK but Let me start making the SPAD with the steps that user post here, and I will post here the updates of my work and get suggestions from other users....

So this thread will be helpful for people who want to make a SPAD from scratch(without any knowledge even)...

If you wish I can proceed else Please close this thread it is down to you...

sriharishine

#3
STEP - 1:

I want to construct the structure first, For that I have to choose the material,

Can Anyone suggest me the material for making a SPAD plane?

Also what are the tools to be with me to start?

I have plans, I will attach and post tomorrow, So you can check and confirm them...

Thanks in advance...  ???

anwar

I do not see any need to close the thread (in fact we never close/lock threads, except for classifieds where the sale is over).  If this is in response to my suggestion that you use the "Search" option, that was general advice to everyone who is starting in this hobby and seeking help from the forum members.  People will think that the same topic has been discussed multiple times before, so why bother answering, and the beginner will get the feeling that folks are high-headed and unhelpful, while it is not the case :)  

Plus there is the obvious benefit of taking in all the great information from the existing threads.

Everyone loves to see new planes being built (regardless of spad/kit/scratch/ARF and even RTF), so please continue posting as you progress with the build, and ask questions as you proceed.  
Hangar : Please see my introduction.
RC India forum and me : About this forum.

anwar

If you have read enough of this forum (or from other sources), you should have realized by now that beginners need a "high-wing" plane (and electric ones are the way to go). The lighter you build the plane, the better your chances of success. 
Hangar : Please see my introduction.
RC India forum and me : About this forum.

sriharishine

#6
Thanks a lot for your great information Anwar...

sriharishine

Hi,

I have came with a plan for my first SPAD. Please check the attached pdf files and let me know Whether I have chosen right one, to proceed.

I have planned to use COROPLAST sheets as building material.

Please post your comments on my above plans.

Regards
Srihari

martian2121

I guess this is a model for 3d flying(quite advanced mode) meant to be primarily made of foam  :headscratch: dont know how it will fare in coro.......
He who knows not and knows not that he knows not is a fool. Shun him. He who knows not and knows that he knows not is a child. Teach him. He who knows and knows not that he knows is asleep. Wake him. He who knows and knows that he knows is a wise man. Follow him.

My Hanger
Profile Edge540 / Multiplex Easystar / Coro Avispad / Scratchbuilt Cub / Lazy Bee / Ultron3D / Jimmy J Flyer's Bug (under construction)

anwar

Srihari - If you note from our previous discussions, this is not a high-wing plane.  Unless you have "mastered" flying on a sim, you will really struggle with this one.

I hope you have seen threads like this : http://www.rcindia.org/self-designed-diy-and-college-projects/my-first-scratch-bild-plane-(-good-for-begginers)/
Hangar : Please see my introduction.
RC India forum and me : About this forum.

sriharishine

Thanks martian, I am dropping that plan as you said.

Anwar,
I have checked this thread before and then only I planned to use the coro, but as martian said this plan is not suitable with coro. So I am just going to follow as RC (as he did in the above thread.)

I will design its complete structure as drawing and will post here to confirm and start building up it..

Great Thanks to RCIndia for such a good support...

anwar

#11
Great ! :)

BTW, there is nothing wrong with experimentation on different materials. Just be prepared to fail, and move on quickly to something else. Most people say that the feeling is most wonderful, even if it fails ! 

If you want it to fly well the first time around, then doing some home work and following the lead of others is certainly the way to go ;)
Hangar : Please see my introduction.
RC India forum and me : About this forum.

maxanjli

are there any plans available to make mig using coroplast

hangingtough

Quote from: sriharishine on February 01, 2010, 07:07:01 PM
Thanks martian, I am dropping that plan as you said.
i can suggest you to go for MOSS which is a easy high wing trainer made of coro

rohitgupta322

You can visit this website http://www.spadtothebone.com/. It contains a number of models ranging from basic trainers to intermediate and advanced builds which can be done from coroplast and other commonly available materials.
Be Inquisitive

flying doc

One of the easiest models to make is the SPAD Debonair. It's a high wing plane and as a first timer, I made all the basic structure in 6 hrs flat. Too bad I did not finish the build and went on to make the SPA3D and now the SPAD Extra.
Most of the models on spadtothebone are for glow engines.
Hope we have another spadder with us soon.
Doc
Tiger Sports 40, SPA3D, SPAD Extra all with ASP 52 engines.
SPAD Debonair with OS 46
Turbo Raven 60 with an ASP 91
Next build - Accipiter 91 with DLE 20
Futaba 6EXAP, Futaba 10 CAP

samlikespad

Sri, what happened to your SPAD build? Did you finish it?

xxkrishxx

hey sam welcome to rc india..have seen u in spadworld forum..same person who built the avispad ,rite?
BalaKrishnan
Mechanical engineer..

Radio:Spektrum Dx6i | Futaba 6EXP | working on coro Avispad | HK450MT kit | Seagull Boomerang 40 | HK 250GT | Upcoming: Easy Star 2 |

samlikespad

Hi Krish, Yup..same person. What happened with your AVI? Did you finish it? Hope you are doing great with your SPADs :)