its my MICRO BOOMIEE...the micro racer boat...

Started by roopeshkrishna, February 03, 2012, 12:54:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

roopeshkrishna

Good after noon all Friends..modelers..Colleagues..by last two days i got some opportunity to go to nearest town, with my Friend Manoj..and way back, i visited shops of my Friends, who are running Duty paid shops..from there i got ample of unused stuffs..got 4 RC Heli, infra red controlled, and most of theam are out of order due to some simple mechanical deffects..i am thanking to my Friend, Ashraf, who always collects and hands over me a lots of needed stuffs for free..so, i started scraping some machines, so, found some previously scraped machines..so, time to make a micro craft..

one of the great head ache related to the IR controlled machines, are the short range and non usability in sunlight..so, at first i replaced the IR L E D s with more powerful five, and made an amp for it with 2N 2219.and fed to 4.8 volts..so it came well..sunlight..? no problem..range..of 15 to 20 meters..doing well..

so, after some tests and researches, i started making the craft..its a micro sprinter, with a deep v...

at first my plan was to use two of the contra rotating motors, for propultion, as the direction control is done by thrust vectoring by altering the motor speed..

here you can see how little one is..
Phoenix.........

roopeshkrishna

the entire boat is made od laminated drawing papers, later painted..
Phoenix.........

roopeshkrishna

she is too small.. (:|~
Phoenix.........

roopeshkrishna

can see with a theoretically 20 Amps ECM ESC..

and i choose a simple super structure to reduce total craft weight..
Phoenix.........

roopeshkrishna

at first i decided to go with tiwn motors, but in test runs i found its too powerful, is capable of taking the craft out of water in an acceleration..so i changed my mind to go with a single motor..
Phoenix.........

roopeshkrishna

the twin motor set is not feasible with this lighter craft..
Phoenix.........

roopeshkrishna

so..used a single motor, along with a series resistor to reduce motor power..

and she weighs only 25 grams including all electronics and battery...
Phoenix.........

roopeshkrishna

and in pool..so stable and stunning...
Phoenix.........

roopeshkrishna

sure..see a simple video here..will shot a good video when i get some of my friends...

Phoenix.........

roopeshkrishna

Friends..its all easy to make a craft...simple.. :) but creative..and theres a famous saying.." make a craft every week..and keep your Doctor away"..did you know whose words is these..? no..?  no problemm anyway its a fact..   so make crafts..run it..merge in the sheer joy of RCying....booooooommmminnnggg.........  :thumbsup:
Phoenix.........

Dharmik

Rupesh bro i have no words to explain. All i can say is AWESOME!!!

Nehutech


U R mind blowing sirji  :hatsoff:

what a simple built...............  (:|~

Specktrum DX6i l EasyStar l Cabin Cruiser 46 l

Turnigy GTX3 l mSP 190 Micro Heli l HengLong Mad Truck l Kyosho TR-15 Roller

coolpratheesh


VC

Growing old is mandatory, growing up is optional!

roopeshkrishna

A million thanks for the inspiration respected modelers..look how simple to make a craft..so..have a lots of crafts to you all.. :thumbsup:
Phoenix.........

pirate

Hi Sir,
Only experts can make it look simple. :hatsoff:
All your works inspire us....thanks for it.
Awesome work

Happy to be in this forum where great people doing magic.

Roopesh, want to know what material you use....is it just the ordinary chart paper or something special board.
What is the MM thinness of the board?
What sort of glue you use to stick these stuffs together, I have seen in your previous post, you have been using some cyno glue.

Please guide us.

Regards
Pirate 

roopeshkrishna

Pirate..no any extra ordinary stuffs are used..i always use the chart paper, costs Rs 5 a sheet, but for an excellent finish can use the Ivory Card paper, usually used for making the visiting cards..this paper costs about 10 to 12 Rs for one sheet here. we can laminate paper sheets with white PVA glue, ( Poly Vinyl Alchohol), like Fevicol.SH, or any white glue..dilute white glue as 50:50, means same quantity of water to glue, for bonding the papers, and can laminate two, for making ladders and doors, while a 3 or 4 sheets gives a stiff structur works..when finished it will be stiffer than wood..will add a simple boat build so can get a clear idea how simple all it is..
we do not need any extra ordinary glues, as i always buy a 72 grade Cyano glue, costs about 30 Rs here..and one can is enough to make 4 to 6 crafts..cool..after making, can brush clear varnish once so will become water proof..and lives for a lifetime..and also will be light in weight..and easy to control..so, wait for a little..will add a simple boat build log..from 0 to pool..its all simple and easy.. :thumbsup: have some nice builds.. :hatsoff:
Phoenix.........

KALYANPRODHAN

Hey, krishna,
Your craft-work is AWSOME.

Surely
1. you born in HASTA Nakshtra (Star).
2. And your knowledge is more than your certificates.
3. You have to work and earn Luck.
4. You can keep secret to secrets.
5. You can work continuously from your self motivation.
6. Surrounding disturbances cannot distort your work and concentration.
5. Your life Partner{as Left is taken as your partner's right hand} (current or would be) have Danger in life in childhood and early teen age but a stedy current lifestyle.

I am assuming from your lines on Hand. Just PM me if I am right or wrong!

This is written as most persons want to hear these about themselves.
I am no Palmist but a simple person.

Thanks

PS: Please check Secret Message by selecting total post.
We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.

roopeshkrishna

good morning Kalyan..a million thanks for your inspiring words..
and i born in Scorpio, and ambition of my parents to make me a doctor, as my Ppappaji, but my ambition was to be a fighter pilot..hi..hi..and now my life is dedicated to model making..and no secrets kept..all you are welcome to my little home..more clearly a little hut..and living alone with my works..yes having many students in model making..some reached me from our forum.. and i know all my works are a little, when compared to many veterans in our RCI, as to their dedication and worship that they all showing on their works..living for it..i salute all of them.. :salute: and a little happy to say that, i am happy to hear my humble works inspiring you all some..and i know you also a dedicated one in modeling..in reality, i have a lots to learn from you Kalyan..so look here..making some crafts are simple and easy..so please share us your nice works.. :salute: so..the inspiration continues.. :thumbsup: :hatsoff:
Phoenix.........

KALYANPRODHAN

Hey krishna,

Have you select all my text for copy ? ???

Dont blame me later... ;D

That is a funny post. Please select if you not.
We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.

roopeshkrishna

Hey Kalyan..you asking about these words..?  "This is written as most persons want to hear these about themselves.
I am no Palmist but a simple person. "..hi..hi..like always..intelligent..god may bless you.. :hatsoff:
Phoenix.........