This would be my second model for sweepstakes another balsa model,

wingsapn is 22inch
weight is 160g
3 channel plane

@jana.f22
Lovely choice of model!
Best wishes.

Nice choice all the best

Great model
Remembering my spacewalker ! may her soul rest in pieces

http://www.rcindia.org/gas-glow-nitro-planes/vq-models-spacewalker-build-log/

Thanks everyone. This will be the smallest model i ever biult

Todays progress

completed the fuse parts

People looking for Plans for 0.46 to 0.60 version of this beauty ! here it is

Planning to convert this to DXF format tonight, anyone interested let me know ( I'll put it up anyway)

Todays progress

completed the covering work, have to put them togather.

Good luck! Coming out beautiful

Yes Sanjaybhai, it really looks beautiful. Nice Job.

@sanjairai sir @tailil  thank you sir

model weights 85g for now with motor.

Jana sir was this the model u told me about?? Also u have superb building skills...looks awesome...

Very nice sir hope to fly with you one day.

Finally the model is ready for take off!! waiting for the sunday

Electronics used

Emax

1806 2200kv motor
10A esc
9g servo
5x5 prop
Tiger 7.4v 500mah battery

AUW : 180g

Size reference pics

When Nitesh when !!! we all are eager to fly with you one day.. 

Jana

You are prolific to say the least ! good going !!!

@ganesh  yes ganesh this is the one i told you.
@rcnitesh  you are most welocme.
@rcpilotacro  Thank you sir.

Sir, this when is killing me seeing all of you guys having a good time flying I feel jealous. I was going to buy the Imax b6 copy from robu.in's ebay listing when I saw it became out of stock. Will have to wait for Kumaran sir to stock it and then I will try my best to come and fly with you guys.

@rcnitesh You can use my charger in the field for now if you want.

Sir I will try my best to come this sunday.
BTW thinking about resorting to micros for flying in near by parks and grounds.

Did the maiden but didnt go well

Can anyone say why my plane is doing this?  when lauching it goes straight but if a rudder input is given it tries to roll so fast. This is 3 channel plane. suggestions pls.

Recheck the rudder alignment on elevator, is it 90 degrees? And the perpendicular alignment on elevator.

Suggestions:

1. Lower the CG. Try and put the battery as low as possible
2. Reduce Rudder throws.In the first video they seemed very high; and that is a large rudder area too
3. Put 40% exponential on rudder

+1 to Sanjay Sir,

Further

Reduce Prop Size by at least 1/3 if not half. I hope you have given the 2 Degrees down and 2 degree right thrust to the motor mount.

Move your CG at least 3-5% forward.