After a few corro models, going to build mini old speedster out of 5mm depron with a wingspan of 20".
Electronics:
18g , 1800kv bl motor
10amp esc
5 g servos
2cell 500mah lipo

Printed out the plans.

Wing construction. V groove is cut in the wing to make an aerofoil shape.

Horizontal and vertical stabilizer cut and sanded from fine grit sandpaper.

do building material cost you cheap??

Quote from: prabal276 on July 28, 2015, 11:45:03 AM
do building material cost you cheap??

I didn't get you.

You have done many builds

Prabal, yes actually I had some depron left over and corro was only the thing I brought. As I am into this hobby for 3-4years now, I had many spares left with me. Depending upon the things I had ,I choose the plans and build them.

Wing construction.

Tail construction.

Excellent

 

Good going Kiran,make sure she flys on a nowind day

Thanks prashant

Fuselage.

More.Tail surface glued.

Wind slided over the slit and glued.Bare fuse weight is 34grams.

Tail wheel added.

Motor mounted.

Servos mounted.

Pushrods  installed

Control horns.

Turtle deck.

Front and back deck completed.

Landing gear installed.