Wing span and fuse length

Started by tg, October 15, 2009, 10:28:03 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

tg

Hi,
     Can anyone comment on the relation between fuse length and wing span. Assuming that you choose to build a model with a wing span say x and chord y, is there a specific formula that decides what should or must be the fuse length.

allthatido

#1
Hi tg

lets say our span is "S" , chord is "X".

Now Aspect Ratio(A.R.) = S/X.

The length of the fuse in front of the wing = 1 or 2 times "X".
                       = 1 or 2 times "(S/A.R.)".

The length of the fuse behind the wing = 2 or 3 times "X".
                                 = 2 or 3 times "(S/A.R.)".


There is no standard fixed formula for rc aircrafts. If you have a long fuse behind the wing you will have large pitching moment...So you need less elevator area. It basically depends on what you want your plane to do...aerobatics, stable flyer. you'll notice that 3d foamie planes have exceptionally large control surface areas..that because the design requires so..they fly by propellor and not wings.

So it would be more clear if you decide what sort of plane you want.

izmile

"Anything can fly" - SPADs just prove that!

tg

Thanks Ankur and Ismail. Will check the kit that I've got. Its a sport foamy flyer that I purchased long time back. The seller makes only cores and the span is 48", the seller was advising to trimming the span to 36". So wasn't sure.