For Sale Trex 500ESP, full Carbon Fiber and metal alloy heli with torque tube drive, approx 25 flights old, very clean, with a custom built carry case.

Extremely well built as per Finless Bob's instruction videos on helifreak. Upsizing to a bigger heli hence selling.

U get 9-10 mins of normal flight and 7-8 mins of 3D with the 3000mah packs.

Here's what is included:

T-Rex 500 ESP w/ Align RCE-BL60G ESC (w/5-6V step-less adjustable BEC) & Align BL500L Motor (1600Kv) x 1
Futaba GY 401 gyro x 1
Futaba S9254 Tail Servo x 1
Align DS510 x 3
Turnigy 3000mah 6S 40C packs x 2

Spares:
H50010 Flybar Rod (3)
H50018-1 Main Gear Set x 2
H50086 - Main Shaft (3)
H50023 Feathering Shaft
H50040 - Tail Boom (3)
Turnigy 3000mah 40C battery
H50097 Tail Drive Gear - 1
H50049T Canopy Mounting Bolts - 1
H50090T Skid Pipe - 1
H50008 Flybar Cage - 1
GT 500-216 AntiRotation Bracket - 1
HK500 Flybar Cage - 1
DS520 Gear Sets - 2
2 in 1 Custom Built Carry Case & Field Sitting Bench (after you remove the heli of course!)

Training Gear can be arranged if needed.

A small time scratch on the canopy as seen in pic and batts are a bit puffy, as are all turnigys these days, but gives full discharge and capacity at rated current. These are excellent batts.

A link of the item. Config has changed a bit recently but largely the same.
http://www.espritmodel.com/index.asp?PageAction=VIEWPROD&ProdID=8998

Cost me well over 55k for everything.  Open to realistic offers.

I fly the heli with an AR7000 rx and can leave that in, just in case you fly with Spektrum/JR gear. That will be extra though. In fact I have a Spektrum Dx7 Radio with 4 x AR7000's and 1 x AR6200 and 1 x AR6100E set up for sale as I am upgrading to a 10 ch Futaba. Chck out the thread here: http://www.rcindia.org/for-sale/spektrum-dx-7-with-5-receivers-ar7000's-ar6200-ar6100e/msg51596/

PM or call me (09818215208) if interested. Items are Delhi based.


Cheers....

More pics

Hello tango,whether the custom built carry case came with the heli or u made by your self? Thank u..

I got the case made by a professional bag maker in Delhi. Materials were personally selected and the bag was designed by me.

Tats really cool..Could u pls explain the design n how to make one? Wanna make one for my heli..Thanks.

Krish,

Its the PP (Poly propylene) soft foam sheets used in packaging cut to shape and a case built around it. The case has additional foam protection and an inbuilt fiber sheet all around. 

Thanks..Can u post some close up pics of tat case outside and inside?

sure...

bump....

I can throw in my Spektrum DX-7 transmitter (listed seperately) making it an RTF package...will give a good deal for both in case anyone is interested...

is everything sol and how much with the DX-7??

Heli is available.

Radio and receivers are sold.

Thx for looking...

Bump.....still available....

Bump still available...28K for heli and spares. No radio or receiver.

Bump...must go....22k for heli and spares. No radio or receiver.

Final reduction 20k......item must go....