I have Limited Stock of the Genuine(Not Chinese or any other copy)X-ACTO foam cutter, this is a very useful cutter and can cut V-Groove and channel cuts with ease, it can also be used with good versatility to cut freehand. Foams it can be used with are:
EPO,EPP,EPS,FoamBoard,BioFoam,Depron,High Density(HD)/Normal StyroFoam,High Density(HD)/Normal Thermocol,BlueCor(Fan Fold Foam), Elapor,SunBoard, Sheet Metal, Vinyl sheets, PVC sheets.

Maximum Cutting Depth is 7/16" which is  approx. 12mm or 1.2cm.
Replacement blades are the #8R Blades:
http://www.xacto.com/products/cutting-solutions/blades/classic-blades/Lightweight-Utility-Knife-Blade-8R.aspx

You can buy this special cutter for 23$ from stores like amazon and Ebay, but i talked to a distributor and procured this item for much less.
Seeing that this is a very useful tool for Plane modelers And DIYers i procured this item for you guys for a lower cost so you can get a professional grade cutter for a cheaper cost.
This item includes 2 blades that are built in and 2 extra blades.



Rs.750 for 1 piece that is approximately 12$ and half the rate. If you are interested to buy it pm me and i will give you more details and payment details.

Here is a video showing its versatility and cutting precision:


Thank You,
Neil

Did u import this

Sorry guys forgot to mention the price includes shipping charges to anywhere in India.
You wont find such a cheap price which includes shipping anywhere else.

Yes ahamed this is imported.

2 sold and 1 Booked for ahamed

Also the cutter has an easy lock storage handle which makes your hand conform around it to give very good grip and its like there is a blade attached to your hand with which you are cutting. Due to this you get increased versatility. You can use the right hand side blade or left hand side blade for comfort, as right handed and left handed people have different preferences.

A secure lock screw keeps the blades secure in the exact position you adjusted them to always even after a lot of cuts, this allows for the cutting depth to be very precise.

Hello,
Please book one for me and send me your bank details on 8140901570.
Kaivalya Pathak

HI Neil,

Pls send me payment details for X Acto   at 9341211628

Thnks

Nakul

Hello RCNeil21,

I like this product, there is huge price difference in each store, please check the URL http://www.xacto.com/Where-to-buy.aspx?SKU=X7747 (Refer pic #1 )

Walmart is cheapest one

(Refer pic #2)
http://www.walmart.com/ip/X-ACTO-Foam-and-Mat-Board-Cutter/16817669?sourceid=1500000000000003183800&veh=cse&srccode=cii_151082803&cpncode=26-25771954

Not sure whether these URL are accessible in India, so I am attaching pics. Just wanted to confirm that I am buying right product.
Wallmart is also showing two prices one with $22 and other $ 2.83  , I guess it's with and without accessories . Let me  know which one to choose.

Thanks in advance .

1 booked for nakul and 1 for Kaivalya i will send payment details soon. before 3:00pm.

5 pieces gone few left get yours now guys or i dont know if i can give it at this price in the future.

Vinayak its good that you stay in USA, Dont go for the 22$ one even though it is genuine so is the one in walmart At 3.88$ you can opt for a in store pick up. Good luck with your buy

Sorry for delay in sending details guys i will revert back by tommorrow evening, All orders will be shipped out on monday, thank you very much.

hey can book one for me  neil i will be able to transfer money by monday

One booked for Yash, tell me your no. so i can send account details.

Orders will be shipped out tomorrow guys, I think by sat you all will have received The cutter

Hi Neil   no news of XActo any shipping ref. number  so I could track it??  Thanks.....

Yeah plz message the details...

Guys sorry was down with a fever,
I wanted to post lot discounts:

2 pieces for Rs.1350
5 Pieces for Rs.3450
10 Pieces for Rs. 7000

Per piece is still Rs.750

nakul it should reach you by monday, yash,ashamed and kaivalya i will message you tracking details

I like the way how it's priced, especially the fact that it starts getting costlier when you buy in bulk!    

That is the way Akio Morita priced his first transistor radios.

Quote from: VC on August 25, 2013, 12:57:09 AM
That is the way Akio Morita priced his first transistor radios.

Rc Neil - 'made in Japan'

Lol no sir its 'Made in USA'

And jaspreet bhaiya the cost of one piece is still 750 so for 2 pieces it 1500 i am offering it at 1350. The cost in bulk is reducing

1@750
2@675 each
5@690 each
10@700 each

Oh yes thats because i have taken it off total
And decreased the rate of 2 so much because buying 2 is most convinient for people, to gift one to someone or have one as spare.
And the discount is off the total, 2 - (2x12$), 5$- (5x12$) , 10$ - (10x12$)

I am giving as much discount as possible, i havent got any such discounts from the distributor as it is already a discounted rate.

Extremely grateful to Neil for letting me have one. 

From what I can tell, it seems to be 100% original and bears the code X 7747.

Great product for anyone working with depron or foamc ore board.

Thanks a ton!

Thank you Neil21  recieved XActo today  seems to have good finish and looks sturdy.  Just need to know if spare blades are available locally for the future. Anyways thanks again

No problem VC sir, this was just a supplicating gesture if you know what i mean.
Nakul i was going to provide 2 Spare blades with each piece but i couldnt get my hands on them.

Though It is like 2$ or something for 5 Spare blades, it is the #8R blades from XACTO.