hi,,
i have built a a coro cub.plan taken from spadtothebones.com (Presently www.spadtothebones.net )
dont have much of built pics.
still some pics to show..
regards.
hitesh..

pics

more

what a nice built!!!!!!!!!

some more

more..

more

Very nice built..... {:)}i wish i could achieve this precision ...

Good Finishing. Cover window with OHP transperent paper and will look like Glass window.
Cover window side with thin black color tape just like rubber lining.
But what is the white colored inside fuselage ? White coro ? (in Hanger 040.jpg). Or Styrofoam ?
Is wing from 3mm Coro or 2mm coro?
And what is your airframe weight ?

thanks for replying.
@kalyanprodhan..sir i have alredy covered the windows with very thin transparent polycarbonate sheet.sir entire fuse from inside is reinforced with 3mm sunboard and plywood formers.
wing is made from two combinations..blue  coro for base is 4mm and top yellow coro is 2mm.inside it has a wooden strong spar..
my auw is around 2700grams.

regards..
hitesh

 

Nice build ....loved dis design been waiting to construct it 

Hitesh babu, mazaak uda rahe ho? How can you call my Avispad a "very nice built"?   It is amateurish when compared to this beauty.

Superb Build brother. Fantastic!! I have so much to learn from you. I am spellbound.

A touch of real class, after a long time. ( No offence meant or intended to other fellow modellers.)

@VC sir please dont embarass me.i get all encouragement from great people like you...

Just one suggestion. This beauty deserves something better than such a rudimentary reinforcement like this. It destroys the entire aesthetics. PLEASE do something about this. Suggest that you hide it by running it parallel inside a flute on a coro piece.

got it sir,will surely do it.actually sir,i have built this landing gear myself to save around 18-19$.and it works superb.i will cover it with a  coro.

That is a true masterpiece.. Very good craftsmanship!! and a very admirable build. Hope she flies as good as she looks. BTW, if you have a 4S use it on this model.. 2s engines spits a lot of oil and makes the model dirty.

-Ismail

nice build   

Superb...!!!! 

thanks all for your comments

regard
hitesh

Hitesh
i think you have made a mistake in mounting the engine, you have mounted the engine on tip of the cowling. Cub's fire wall is right below where the front wind shield ends. remove this and push the engine back to the intended firewall. looking at your build she should fly with .25 easily. the weight you have indicated is with the engine isn't ? that also explains why she took off and fell back to the ground, she is extremely nose heavy

sir thanks for replying..
the plan i referred to says the engine should be mounted at the position where  i have mounted.also i saw a hanger 9 piper at a fellow modeller's place to see how the engine and fuel tank is mounted on it..i even took 3-4 snaps and then mounted mine engine..

regards..
hitesh

Hitesh, thats a beauty !!!  builds like these are gonna attract more builders to SPAD building  Way to go man!

thanks samlikespad..

ya coro models are real fun to build..

regards..
hitesh..

i have already done its maiden.there is some issue with the engine.so i have to change it.once i do it ,i will upload the flight video.....