HK-450MT 3D Helicopter (T-Rex 450 Clone)

Started by findvikas, October 22, 2010, 04:00:49 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

xxkrishxx

is that T-rex 450SE building same for the Hk450 too?? I can see only one set of building videos from RWMAA,anymore is available?
BalaKrishnan
Mechanical engineer..

Radio:Spektrum Dx6i | Futaba 6EXP | working on coro Avispad | HK450MT kit | Seagull Boomerang 40 | HK 250GT | Upcoming: Easy Star 2 |

sujju

pls check on helifreak for bob finless videoa.. or jsut google .. bob finless videos for trex 450 build on helifreak
CEO
RcBazaar

findvikas


azhaguvel

Can i use

HobbyKing 939MG Metal Gear Servo 2.5kg/ 12.5g/ 0.14sec
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idproduct=14458
or
HobbyKing 929MG Metal Gear Servo 2.2kg/ 12.5g/ 0.10sec
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idproduct=11856

for my HK450 gt(all four servos)?
what is the difference between hk450 gt & hk450 mt?

vinay


azhaguvel

So carbon fiber is light & strong rgt? what would you suggest?

Answer to usage of the servos please.

findvikas

Here is a very detailed comparison of both... choose wisely, just few dollars difference

Part 1



Part 2

http://www.youtube.com/watch?v=9le8LjSznQM&feature=related

azhaguvel

This might be a silly question but just wanna know.
Can i replace the hex screws in the HK450 heli's to normal screws which i can find in hardware shops or electrical shops.

findvikas


azhaguvel

Have somebody tried replacing the hex screws with screws locally available?
I tried a cheap hex screw driver on the screws in hk450 & stripped one  :(  :banghead:.
It would be great if the hex screws can be replaced with ordinary screws of same size(length can be reduced to necessary, best is to find bigger screws & reduce it to necessary sizes).

anwar

Some spare screws should be in the kit, have you checked ?  Not too sure about HK ones.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

vinay

OK Guys here is a comparison. I was recently unscrewing the screw of the tail blade holder on my 500. It was 1.5 mm hex. The screw also had grip on the outer edge so that I could unscrew it using a cutting plier as well.

The screw was tight and hence I did not want to strip my hex driver. Instead I tried using the cutting plier with FULL FORCE and I was not able to unscrew it. So I heated the screw a lot and then tried the cutting plier with full force and the screw didnt even budge.  :P So i decided I will use my hex driver, this time the screw came out like a butter.

Moral of the story. Hex makes life easier. They didnt simply choose hex over philip or flat screw. Hex eases the unscrewing especially on a application like a heli.

U should be fine using local screw. But going with a good hex driver solves most of the issues, especially if u guys plan to stay long with HK helis.. I learnt it the hard way.


findvikas

I am very confused and fighting with two questions in my mind.

- Do I really like flying Heli as much as I thought?
- Should I really fly a big 3D Heli?

I am unable to get a clear answer and that is why I have kept the build idle for some time, while its almost complete and just configuring Radio & electronics tweaking is pending. I need to have a clear answer before I decide anything.

Just a heads up, If I decide to not fly big 3D helis (at least at this time), I will be looking for buyers for the entire kit. Please suggest :(

rajathv8

Its Not like its gona deprciate or anything and not like you are going to have a shortage of buyers. Hey keep it aside for now untill you answer those questions - cos only you can answer them.  Hope you will see the light soon :D Take a chill pill and have some pizza :)

vinay

AFAIK, I hated helis. I was a plane guy  ;) I loved them. Until I realized that it was tough to carry it around on my bike.

Thought I will get a heli and practice it till I get a car. Initially it was tough! I felt like I will never learn hovering. I had 100s of hrs of sim, still I felt it was tough. But I had nothing else to fly! So I had to continue with my 450 - FORCEFULLY! My 3rd flight was my major crash. YOu can see the video on my 450 build thread.

I had to replace most of the parts. PAINFUL! Not money wise but work wise.

After learning how to fly and realizing the 3D potential of an heli and seeing lot of 3D videos and knowing that I am standing out of the Easy flying plane group gave me a lot of interest!

Today I dont even feel like flying planes! If i buy planes in the future it would be an yak or an extra,  a bipe and a fast moving EDF. Just 3.

TOday I already have 4 helis with me.  :giggle:

IF u are planning to sell the kit at a fair price, let me know rc crazy doc was interested.

findvikas

Thanks Vinay, I will take some time before taking any action. And try to create my interest in it... the problem in SIM is that if it goes little far its almost invisible does that happen in real too? I mean I cannot make out where its heading, what orientation.

anwar

That is true for any sized model, that they get small and cause disorientation as they fly far, both on the sim, and in real life.  For helis like the 450 (which are small, NOT BIG!), you fly them not too far from you.  There are some tricks to improve the visibility (like painting the canopy with fluorescent orange paint with a black windshield, which is the best combination I have seen yet).
Hangar : Please see my introduction.
RC India forum and me : About this forum.

vinay

Believe me the visibility is worse in real life, coz on the sim the camera zooms as the heli goes far, but in real life there is no zooming  >:D

anwar

The zoom is something you control from the sim settings, and I keep it turned off !
Hangar : Please see my introduction.
RC India forum and me : About this forum.

vinay

I have a small 22" LCD so I need the zoom.  ;) If i had a 30+ incher then I would have gone for zoom switched off.

findvikas

Trust me even on my 40" it gets invisible :) while the screen size is increasing the resolution also increases. I play the AeroFly on true HD (1080p).. really amazing :)


findvikas

I am setting up my Dx6i with the heli... does anyone has Dx6i with 3 servo Swash Plate heli similar to trex 450 and mind sharing his settings with me ?

anwar

The settings cannot be copied verbatim from one heli to another.  Some of it can be reused, but not everything.

This video should cover your needs quite a bit.

Hangar : Please see my introduction.
RC India forum and me : About this forum.

findvikas

Thanks Anwar... I looked at this video and this guy is using DX6 and NOT DX6i so its little different but yeah gave me much of the information that I had looking for. And then I cross verified with Bob Finless's CCPM config video... so far looks good... but maybe another 400-500 hours of Sim practice before I have enough guts to take it out in open :)

vinay

400 to 500 Hrs?  :headscratch: Then u will be taking it out next year.  ;D

What I suggest is that you should be able to do a FFF and be able to get the heli back and land it in front of you. THat is the time to take it out. The reason Iam telling u this is coz when I tried my heli I gave a little more throttle and the heli took off and went like a 100 feet away from me. Lucky for me rajesh was there   ;D