H-Quad Build (JIT for the RCI sweep!)

Started by veloci, February 21, 2013, 10:40:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2 All
User actions

veloci

February 21, 2013, 10:40:54 PM Last Edit: February 22, 2013, 01:15:14 PM by veloci
Hello everyone. Here is an attempt to build a H-QUAD, obviously inspired by the guys from 'flitetest'. The dimensions have been shamelessly nicked from the flitetest website. ;D
I have used 12mmx12mm aluminum extrusion and 3mm polypropylene sheet instead of Poplar wood and Balsa as suggested by Josh-n-Josh.   ;)

My setup:
Motors - MT2213 from RCD
ESC - Turnigy 25A basic
FC - KK2 board from Adiboy
Battery - Turnigy 2200mAh 20c 3s X 2 again from Adiboy  :hatsoff:

Here are the pics and the "PLAN"  ;D
Hope this qualifies for the sweep  8-)

P.S - Its fun and easy building a quad anyway, so do give it a try :thumbsup:

EDIT - Flitetest video
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

veloci

#1
February 21, 2013, 10:42:49 PM Last Edit: February 21, 2013, 11:08:40 PM by veloci
More....

(Did not realize that i had fevibond on my fingers!  :giggle:)
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

veloci

#2
February 21, 2013, 10:46:41 PM
The manual drill was a gift to me from my late grandpa. Got to use is here as my drill gun was with a friend  :)

The motors have been fixed using nylon spacers thereby eliminating the need for a hole to accommodate the cir-clip of the motor  8-)
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

veloci

#3
February 21, 2013, 10:48:16 PM
More.......
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

veloci

#4
February 21, 2013, 10:50:30 PM
The quad was completed in one day.....one whole day....  ;D
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

veloci

#5
February 21, 2013, 11:01:35 PM
Here are the last two pics of the H-Quad. Used the packing foam that was lying around to assist in landings(read hard landings  :giggle:).
I have tried to make this build log as comprehensive and simple as possible so that somebody, somewhere can be encouraged to build one.
It was possible to build it in just 1 day as i had a 'diligent' friend who was as desperate as i was to get this done today.
Shall test fly it soon and upload the flight video as it was already evening by the time we were done tweaking it.
More fine-tuning and additions to be done and will get back with the update soon.

Ideas/suggestions are most welcome 
Cheers!
;D
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

Dharmik

#6
February 21, 2013, 11:39:31 PM
Unique and nice build, waiting for the maiden video. Keep it up

veloci

#7
February 21, 2013, 11:40:14 PM
Thank you Dharmik bhai :)
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

Adiboy

#8
February 22, 2013, 01:46:40 AM
Superb Build Abhishek...!! Also thankyou for credits..!

lastRites

#9
February 22, 2013, 07:21:14 AM
Nice build :) But the way the motors are mounted, they would not take to hard landings well. As they are anchored to the frame at only two points with a very small footprint, twisting may also become an issue.. You can attach a small piece of ply to the ends of the arms with epoxy and then attach the motors.
It is the pervading law of all things organic and inorganic,
Of all things physical and metaphysical,
Of all things human and all things super-human,
Of all true manifestations of the head,
Of the heart, of the soul,
That the life is recognizable in its expression,
That form ever follows function. This is the law.

arun.sreelakam

#10
February 22, 2013, 08:27:43 AM
Very nice build... Looking beautiful..
When is the maiden planned?  (:|~ (:|~
All the best
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

veloci

#11
February 22, 2013, 11:36:20 AM
@Aditya, forgot to mention about the 10x4.7 props. That was my 1st buy from you  ;D
@lastRites, will try to incorporate your idea. Thanks  :hatsoff:
@arun, will try to maiden it ASAP...Thanks for the encouragement  :hatsoff:
Cheers!
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

manojswizera

#12
February 22, 2013, 12:48:47 PM
Veloci.... {:)}
This is indeed a very beautiful build.

will try to make one after sufficient funds.
will need ur help that time. ;)
Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.

veloci

#13
February 22, 2013, 12:50:37 PM
@swizera, Anytime friend... :)
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

satyagupta

#14
February 22, 2013, 03:59:46 PM
Awesome build, let us know about the maiden.
one stop for multirotor needs:
www.quadkopters.com

http://www.facebook.com/QuadKopters
https://www.youtube.com/user/QuadKopters
https://www.instagram.com/quadkopters

veloci

#15
February 22, 2013, 04:17:31 PM
Thanks Satya bro... I will maiden it soon....
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

arun.sreelakam

#16
February 22, 2013, 04:34:50 PM
Veloci i will recommend you to give some foam under each motor to balance well while landing(I mean hard landing  :giggle: :giggle:)
Which will definitely give some support while landing.. All the best for maiden.. again  :thumbsup: :thumbsup:
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

veloci

#17
February 22, 2013, 04:41:51 PM
haha.....thanks arun....i will implement that also.... :D
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

Dharmik

#18
February 22, 2013, 07:42:03 PM
Veloci I agree with lastRites the way motors mounted might generate vibrations, you can put hole in the aluminium pipe instead.

veloci

#19
February 22, 2013, 09:32:25 PM
ok Dharmik bhai... :)
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

veloci

#20
February 22, 2013, 09:58:29 PM
Update
Since, i had red colored props for all the four motors, i thought of 'pimping' them up.....
I couldn't just stop with spraying the props  ;D
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

veloci

#21
February 22, 2013, 10:00:28 PM
 ;D ;D ;D ;D ;D ;D
Airplanes may kill you, but they ain't likely to hurt you.
~~~Satchel Paige

Adiboy

#22
March 01, 2013, 02:28:35 AM
Any more Updates...?

Rahulvyas

#23
March 02, 2013, 02:05:49 PM
maiden video please? :)  {:)}  {:)}
Awesome build.My quad build coming up soon! Stay tuned   :giggle:  :giggle:
-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student

sudhakar_yg

#24
August 04, 2013, 09:22:44 PM
Hi veloci,
Have you been able to do maiden of your H-Qaud?
Design is pretty neat!!
Please post your feedback, I am planning to design one, hence your expert review is very valuable.

Thanks.
Print
Go Up Pages1 2 All
User actions