Main Menu

QuadH 310 wooden

Started by eyesonsky, June 05, 2014, 02:22:57 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

eyesonsky

I made this 310 for gopro 3 onboard.

Frame:

310mm X diagonale
2x arms 10 x 10 x 260mm
1 center plate 7.5 x 0.5 x 260mm
4 nuts and bolts, 3M fiber glass reinforced tape, velcro and nylon clamps.

FC: openpilot CC3D
Tx/Rx 2.4 mode PPM - satellite Spektrum
Motors: Sunnysky 2204 2300KV
ESC: Lumenier 12 amp ESC with SimonK Firmware (N-FET)
Props: HQ Prop 5x4
LiPo: nanotech 1A 25C for tests

FPV: gopro 3+, vTx vRx Lawmate 1.2

520g

First tests last we, first crash (radio cut) = 1 prop, second = 2 props.

Joël
@youtube . . . Constructions: QuadH 470 . . QuadH 310

Nithinraj Kotian

Life is Simple Don't Make it Complicated

eyesonsky

Quote from: Nithinraj Kotian on June 05, 2014, 08:08:46 AM
Flight time ??
I have made these flights just for test with a 3S 1A.
I think to go with 3S 2.2A.
Joël
@youtube . . . Constructions: QuadH 470 . . QuadH 310

ashimda

Nice build very clean. Whats The AUW ?

eyesonsky

Quote from: ashimda on June 05, 2014, 10:01:30 PM
Nice build very clean. Whats The AUW ?
Thanks.

With the 3S 1A = 520g
the frame = 120g
Joël
@youtube . . . Constructions: QuadH 470 . . QuadH 310

ashimda

You may find the 2.2A a little to heavy, try the 1.5A . Can you run 6" props on that setup?

eyesonsky

Quote from: ashimda on June 05, 2014, 10:33:57 PM
You may find the 2.2A a little to heavy, try the 1.5A . Can you run 6" props on that setup?
You have maybe right... will test.
Yes I will also try with HQ props 6"x4.5
Joël
@youtube . . . Constructions: QuadH 470 . . QuadH 310