Fly Sky-FS-TH9x-9ch Radio

Started by chokxxi90210, October 08, 2010, 11:14:16 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

balasubrahmanyam

now i had to connect to the 3rd channel of my reciever okay fine thanks brother...

but wen i connected it to the 1st channel smoke came out from the esc... quickly i had disconnected the batttery...what may be the reason???

spitfire

There must be some kind of shorting thats why smoke is coming.
Is ur ESC still alive ...?

balasubrahmanyam

yes its working....
so can i proceed by connecting esc to the throttlechannel(3rd channel)??

balasubrahmanyam


anwar

I am worried about the smoke part. Did you connect it to channel 1 with the connector reversed ? Some receivers absolutely hate that, although the vast majority of good ones will survive such connection reversal.

Also, I am not sure how you determined it is working ? If it is working, what is the pending issue ? :headscratch:
Hangar : Please see my introduction.
RC India forum and me : About this forum.

spitfire

was your motor connected to ESC when u got smoke...?

balasubrahmanyam

after that i had cagain connected to the reciever to battery slot and servos to the other channels... they were working but i dint connected to the motor.... i will see by connecting to the 3rd channel tomorrow and see.....
regarding the connectors white wire should come upwards right???

balasubrahmanyam

no no at that time motor was not connected....

rcforall

#33
Balu ,
On the face of the flysky receiver clearly the polarity and the the position of the signal is indicated . You cannot go by right and top etc.

BTW should you want any help it would be a good idea to let people know your receiver model number.

Check out the enclosed PDF.

The ESC Could have smoked only if the polarity between the ESC and the Battery was wrong . There is no other reason for ESC Smoking.

Sai
www.zuppa.io : vehicle telematics, ADAS, IoT , Drones

rcforall

Quote from: spitfire on November 14, 2010, 12:30:40 AM
You should connect esc to throttle channel..provided it has inbuilt BEC.

Irrespective of the ESC having a BEC or not the ESC is always connected to the throttle Channel.
In the case of an ESC with Opto BEC ( external BEC)  the BEC is connected to the Battery Channel.

Sai
www.zuppa.io : vehicle telematics, ADAS, IoT , Drones

balasubrahmanyam

SIR
WHEN I HAD CONNECTED MY FLYSKY TRANSMITTER TO THE 2.4GHZ...TRANSMITTER IS BEEPING CONTINOUSLY...WHAT MAY BE THE REASON... IF I HAD DISCONNECTED THE 2.4GHZ STICK BEPING IS OFFED....
PLS TELL ME WHY..

rcforall

Balu ,
I cannot understand what you mean by connected your transmitter  so I assume you mean switched on or turned on.
I  presume from my experience that  you are talking about the switch error message  but have not mentioned the message flashing on the screen when the beeping happens . Check this video out. It is a safety feature to avoid problems especially with helis :

http://www.youtube.com/watch?v=GhwOWtcagnA&feature=related

I cannot also understand what you mean by 2.4 G stick  do you mean the module of antenna .

SO PLEASE  PROVIDE CORRECT AND FULL INFORMATION IF YOU WANT HELP.

Rgds
Sai
www.zuppa.io : vehicle telematics, ADAS, IoT , Drones

anwar

Hangar : Please see my introduction.
RC India forum and me : About this forum.

balasubrahmanyam

i donno what happened my 1500kv brushless motor stopped working suddenly...
my plane weight is 1200gms... can i use the 3500kv motor  and 40amps esc with the 9x6 propeller???
help me,..... battery is lipoly 11.1v and 2650mah.....

balasubrahmanyam


anwar

Answered here (where the question was duplicated) : http://www.rcindia.org/beginners-zone/propeller-size/

In short, the motor and ESC will work together, but the prop needs to be smaller.  And depending on the type of plane, that may or may not be acceptable.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

balasubrahmanyam

#41
Im sorry sir, wouldn't repeat it again.


balasubrahmanyam

#42
Sir 5x4 propeller... Here 5 is length and what is the 4 here ???

anwar

Hangar : Please see my introduction.
RC India forum and me : About this forum.

Subodh

Quote from: balasubrahmanyam on November 17, 2010, 02:09:03 AM
Sir 5x4 propeller... Here 5 is length and what is the 4 here ???

hi see this video it will help you understand propeller better

http://www.youtube.com/watch?v=dPOG8PM6nMM&feature=player_embedded

Cheers

iamahuman

Never having cared about propellers,this video taught me a lot.good video.
"Chuck Norris once overcharged a lipo. Thank him for the Sun."

SSC LCG Slash 4x4.
JQ THE eCar.

Subodh


ForeverFlying

Does anyone know where this radio can be bought without the module and receiver? I had it at one time, and lost it!
Thanks!
Mike
:)

anwar

Buy it second-hand, and sell back the module + receiver ? :)
Hangar : Please see my introduction.
RC India forum and me : About this forum.

rcforall

Interesting Yahoo group
http://groups.yahoo.com/group/Flysky_RC_radio/

Anwar ,
I posted a thread for this link you can delet that  as this is more relevant here
www.zuppa.io : vehicle telematics, ADAS, IoT , Drones