How to make a new post on this forum

[Vjazz007]

Hello I am new over here can u help me how to write a new post??

[saahil]

well vijazz007 please go through the other threads to get an idea.
by your writing i assume you have knowledge to read and write in English language
so posts are written the same way you have written one above.
and if you are asking about thread then it is written depending upon the topic, we have lots select the appropriate one and start a new thread.
and welcome to RCI.

[Vjazz007]

Thank you for your help sahil:) will make sure to be ready next time.
Vjazz

[anwar]

VJazz - Welcome to RCI

This question is a bit like walking to someone and "asking how does one walk" !

In general, the steps are like this :

1.   The first thing you do is to use the search box on the top right to see if the issue you are having is already discussed and solved earlier.  That requires some patience, and creativity in searching.  If you find the right stuff, you are done, no need to post (unless you want to add your own detail to the issue).

2.   If you cannot find a thread from the past the discusses the same issue, then you need to decide which "board" you want to post in.  There are boards for "Electric planes", "Helis", "For Sale", etc etc.  Navigate to the home page of this forum, and click on the board you want to post in.  Once INSIDE that board, you click on "New Topic" button (in blue color) on the top right.

3.  Now comes the most important part.   Pick a MEANINGFUL topic name for your post. Don't say "Help me", or "Help needed" or "Help" or "For sale".  Most newcomers here are here seeking help or to sell stuff, so if everyone posted these generalized topic names, then it defeats the whole purpose of having topic names !  So use a topic name that gives some idea to others who are browsing the forum as to what your issue/need is about.

4.   Finally, for the love of "the guy up in the sky", don't use SMS language or all capital letters while making the post.  Post enough information so that others can understand and try to help.

Hope you enjoy and contribute to this forum.

[rameshwar]

can anyone tell me how do u delete ur own post ....?

[devangflyer]

Just ask a moderator to delete it .
I don't think we can delete it .

[yash12]

Do a market survey for all the Electronics required for a RC Plane With Empty Structural Weight of 120g (without Electronics) and The Payload Fraction to be 0.75 with Gyroscopic Assist. Use a Suitable Thrust is to Weight Ratio.
I NEED TO GET information needed to solve this problem

[ramsarath]

Hi everyone, Urgently require Thermal Imaging camera or IR Camera for rental purpose . Is anyone there for providing it rental basis

[Somnath Maji]

I want to purchase Top rc hobby blazer trainer. Is this a good aircraft? hi I

[rqvidarling143]

Hi guys,
My parcel RL727702806CN....I didn't got till now...please help me.

[amittomar]

RCmoment:
This company is fraud
this company is fraud, Normally they will take money and supply you defective product. There customer care will keep on lingering issue until it is out of warranty and then they will tell you to get it repaired from local shop.

[amittomar]

Please note here i am talking about Chinese company RCmoment, who are selling defective product to Indian market.

[sachin]

As a Tx Battery

Main query (Dx7 battery replacement) moved to appropriate board.

[mskrajpurohit]

Dear Sir,

I am Mahendra Rajpurohit from India, I have ordered for Drone X Pro, UK, which have 2.4GHz Frequency. but received letter from post office that parcel is on held for WPC certificate.

As per Public Notice No. 111/2013 of office the commissioner of customs (Import) File No. S/22-39/13 PAS dated 12.09.2013 2.4GHz Frequency are not required WPC.

Please suggest for clearance of good from Customs.

[Somnath Maji]

Hi this is Somnath Maji from Durgapur (WB). I have a single motor home made airplane with FPV system. I purchased 5.8ghz vtx, uvc off video receiver & camera from banggood site.
Now I would like to install OSD in my FPV system, which displays battery charge, current, altitude, RSSI, flight distance from take off place and GPS+compass.
So, please help me..... what would be the best way to get these things in my FPV ground station monitor or in my mobile phone screen.

[Vasan]

I want ETA certificate for tyro99 drone, anybody have, customs ask ETA certificate for this model

[Anmol Sharma]

Hello, I hope all are safe and healthy. I need help.

I have made a drone. Below are the electronics used :
DJI 450 Frame. 2200 KV motors, 30 Amp Simok ESC, APM 2.8 with GPS, Fs -i6 TX and RX, 1045 props and 2200 mah battery.

Problem:

When I arm the Drone, All the motors starts spinning and suddenly one motor(lets Say Motor "A") stop and other keeps on moving, When I raise the throttle, motor "A" starts moving but it has lower RPM then other three motors which makes the drone move in one direction causing instability. I calibrated my ESC and all motors start spinning and after few seconds one of the motors stops. I have changed so many ESC's but still same problem persist. Please provide your suggestion and help.

Thanks
Anmol