My own built of SPAD EXTRA.

specification follows . . .

snap

snap

Nice .......

Is it all Coro ?

ya . . . full coro. and used PVC pipe for spar

Nice..

So when it will be ready for flight ??

Is she going to be electric or glow?

wanna buy engine. Rest of accessories,i have it.
planned to buy ASP 51.total weight is 3 kg
Is't enough?

If one were to build this for electric conversion, can someone please suggest a good enough combination for it?

Cheers!

 

updated below

some more snaps

nice with an IC engine..wroooms..

what is the span  AUW, engine...?? also which tank u are  using... looks like a cramp space...

satish
were you some hurry, ? very coarse cut, issues
(a) Wing section is not cut properly post wing will stall first, which means on final and at high alpha she will wing drop left, take care by not letting her stall
(b) fuse is warped
(c) Wheel tack is less
(d) support to the fire wall is poor, reinforce it
(e) Rudder horn is behind the hinge line, servo will twist the rudder and eventually the rear fuse

all the best !

@ rcpilotacro i'll do the changes. thanks a lot

started back.

My extra

snaps

snaps

maiden soon

have a doubt.
AUW is 3.5kgs with OS .46.
will effective?

prop size is 12.5x6

Hello Sathish,

Congratulations on your new model. This is one of the best builds that I have seen in the forum. Keep up your good work.  At 3.5Kg you should be OK to do moderate aerobatics. Hovering my not be possible.

One suggestion on your landing gear. Try to have some sort of rubber between the landing gear and the fuselage former. You could cut the sole out of a old leather footwear or since you have a garage you could cut one from an old tyre. The extra rubber cushion will prevent damages due to hard landing.

Enjoy!

-Ismail

@ izmile thanks and yesterday i flew my extra with .46 . . . plane flied under power.need power !!! . . . and i will do the work on landing gear as u said.

gonna buy new engine

Congrats Sathish!!! Video please

@ samlikespad . . .thanks and will do soon