This is my self designed flying carpet. made by depron and coro(same ad board ), 1100kv bl motor, 8x6 prop, 2x 9g servos, 2S 1300mah lipo, weighs below 200g. elvon mixing is done. again this is scratch built 

http://www.youtube.com/watch?v=qlA57r95ex0 Have a look at the video. I should practice much more on elvon mixing. It was a bit windy then.

nice backyard flyer
guess u dont have to search for a large field to fly anymore

exactly you can see it assending in a spiral way 

Yes these are High alfa plane types like the flying pizza or the Pizza box flyer .
Great effort Akash good job 
Sai

Thank you very much Mr Sai

hey akash nice one by the way did you have any orientation problems i for one could not make out (sorry still a beg.)

best

sahil

why don't you post some plans if u are up to it,may be other will try it out 

sahil

hi sahil, at first i had serious orientation problems. If i get inverted and fly too low, i often pull up the elevator and hit it directly to the ground. i painted the bottom part red so tat i can find out whether i am in normal or inverted. Then i tried on fly by nose method, which improved my skills very much. had lots of practice in sim and got confidence. still practicing on elvon mixing(am also a beg only )

regarding the plans, i didnt go for a serious calculations or anything. all i kept in mind was to keep the weight less, optimum thrust and big wing area (so tat i can glide and rectify my mistake in control, else i may hit it). i will create a plan for this model and post it soon. pls note elvon mixing is not suitable for beg. instead one can try for a elevator and rudder type control.

akash

Reminds me of my PBF...

Hope you don't mind posting my video here..

wonderful ... it takes the weight of glow engine and what material is that?

Its just a square peice of coro.. Its just 3 hours of build time and lots of fun. No fear of crashing either...