My E-MTA will be shipped to me this week ... now what's the best battery and charger for it ...
I was looking for Venom 2S 35C 5300mah X2 will use them parallely is it enough and good ? I don't want extreme speeds but a good play time on a normal speed.... any other batteries recommended ??
And also need a charger for it ... charger I don't want anything expensive should be reasonable ...Thanks

Any little help guys ?

The Venom batteries should be pretty good. You'll need to use them in series though.

What's your budget for the charger? Take a look at a multi output charger so that you can charge both your batteries at once.

Quote from: iamahuman on July 06, 2014, 03:56:25 PM
The Venom batteries should be pretty good. You'll need to use them in series though.

What's your budget for the charger? Take a look at a multi output charger so that you can charge both your batteries at once.

Why is that I can only use them in series ?? I wanted to use them as parallel for longer run time ... can you please explain this ...
And for the charger my budget is around 4K ... I am getting a imax 6 charger the original one ... is that a good stuff ? Any other better than dat ?

Not enough for these go to rcbazaar and see the v680 its nice.

The E - MTA is a 1:8 scale vehicle. 1:8 motors like the one in the MTA are meant to run on 4s.

The IMAX should be fine but you'll spend quite some time charging your batteries.

Quote from: iamahuman on July 06, 2014, 08:09:51 PM
The E - MTA is a 1:8 scale vehicle. 1:8 motors like the one in the MTA are meant to run on 4s.

The IMAX should be fine but you'll spend quite some time charging your batteries.

So that means for parallel I have to use 2x 4S ... right ?
And this what the E-MTA sites says in description "dual LiPo batteries with 2S 7.4v or a whopping 3S 11.1v power"
Sorry 4 the same question again actually a little confused

Quote from: rcrcnitesh on July 06, 2014, 07:49:40 PM
Not enough for these go to rcbazaar and see the v680 its nice.

V680 will charge them fast ? Thanks 4 dat will check them out.

The 2000 kV motor will do well at 4s. You'll need 2 2s lipos in series for a 4s. The 5300 mAh batteries should give a good runtime.

You can use 2 4s lipos in parallel if you want. There's a limit to how big a battery you can have due to the unusual location of the battery box on the MTA.

Quote from: iamahuman on July 06, 2014, 09:18:20 PM
The 2000 kV motor will do well at 4s. You'll need 2 2s lipos in series for a 4s. The 5300 mAh batteries should give a good runtime.

You can use 2 4s lipos in parallel if you want. There's a limit to how big a battery you can have due to the unusual location of the battery box on the MTA.

Thank you so much ... I finally got it
This battery thing was driving me crazy from past 2 days ... will be getting my car & the batteries by Tuesday will let you know how it works

can't find the v680 at rcbazaar ..infact all the chargers at rcbazaar are out of stock ... any other suggestions bro ?

You can go with a 50W or an 80W charger. Check RC Dhamaka's stocks once.

Imax b6 colne at rs 1500
And imax b6 skyrc original at rs1900
Shipping is extra
If interested plz let me know

Regards
Chintal
Rcmumbai.com

Ordered this Zippy Battery from HK .. And for my bad lucky they are not able to fit in my tray ... Like it does slide in easily but cause of the battery wire it gets stuck and i cant close the Battery tray.
Anything else can be done ? A flater cable ?? Don't wanna do any cutting on my new E-MTA
I have attached the pics which will give you a clear idea ... (Images are not straight .. watch it from left)

It's been a while sicec I saw this video but I think the guy uses inboard batteries like yours. Take a look.