RC India

RC Equipments => Batteries and Chargers => Topic started by: azhaguvel on May 19, 2011, 09:04:07 AM

Title: Charging a bike battery
Post by: azhaguvel on May 19, 2011, 09:04:07 AM
Can I charge my bike battery with this charger

HobbyKing ECO6 50W 5A Balancer/Charger w/ accessories
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11060

It does seems to have charging leads for a lead acid battery
Title: Re: Charging a bike battery
Post by: Sreedhar on May 19, 2011, 09:14:15 AM
I dont think a program is available for the current charger to charge a lead acid battery...
Title: Re: Charging a bike battery
Post by: azhaguvel on May 19, 2011, 09:36:19 AM
what is this Pb mode for?

Spec.
Input Voltage: 11~18v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~5.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 170g
Dimensions: 138x75x23mm

Title: Re: Charging a bike battery
Post by: RotorZone on May 19, 2011, 11:31:46 AM
You can charge lead acid battery with it. But beware of the extremely corrosive acid. Do not connect your leads directly to battery, use pieces of wire you don't mind throwing away after use. Do this even if the battery terminals look clean, there will still be traces of acid.
Title: Re: Charging a bike battery
Post by: ashutoshn on May 19, 2011, 11:35:08 AM
Pb mode is to charge a lead acid battery. That's what my charger manual says. But didn't delve into it for fear of damaging either the charger or battery ...  :P

The bike's battery get's fully charged during bike's servicing ..  :)
Title: Re: Charging a bike battery
Post by: HamAero on May 19, 2011, 11:49:14 AM
For 6 volt (2v * 3 cells) Battery , Set the voltage @ 8.4v (1.4 * No. of cells) & Charge current @ 5% ~ 10% of the rated mAH

I regularly charge my batteries (SMF) using a similar charger.


Sanjay