how to charge a battery?

Started by pylonplane, December 14, 2012, 10:07:32 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

pylonplane


anwar

No one can answer these.  First, it is not clear what batteries are you using on the TX.

On the second one, it is really surprising that RCBharat has listed lipos without any proper information.  No cell count, no C rating... how would anyone decide to buy this stuff ? :o
Hangar : Please see my introduction.
RC India forum and me : About this forum.

pylonplane

Sorry anwarbhai i thought all the tx have a inbuilt battery . So now the question is that which battery can be used with tis tx and how it can be charged? And the second question is that how to charge this battery? http://www.rcbazaar.com/products/1266-wolfpack-2200mah-3s-20c.aspx

sanjayrai55

Anwar

I just scrolled down on the LIPO page and this was there:

Specification
Battery Configuration: 11.1V 1300mAh 3cell
Battery Capacity: 1300mAh
Max Continuous Discharge (C-rate/current): 25C
Max Burst (3Sec) (C-rate/current): 40C
Approx Dimensions H x W x L (mm):  21.5 x 35 x 68
Approx Weight (g): 100

pylonplane


anwar

Quote from: sanjayrai55 on December 15, 2012, 12:00:17 PM
Anwar
I just scrolled down on the LIPO page and this was there:

It could have been there earlier... and I may have missed it.  It is sort of a bad page design. I would be surprised if such basic information was not there.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

anwar

#6
Quote from: pylonplane on December 15, 2012, 12:17:05 PM
but how to charge it?

What exactly is the confusion ? It is a 3cell lipo, you need a lipo charger that supports 3s (and balance charging).  Search the forum, there are many threads about which are the commonly used / affordable lipo chargers.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

pylonplane

and which battery should be used for the tx?