Dear modelers , i Have recently bought this charger  http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=11060
Problem
1)  When i connect 2s battery & when i hold the start button it ask for the conformation and when  i press the ok button it gives a error     INPUT VOLT ERROR

2)  When i connect 3s battery and hold the start button, it just restart itself with the HBK eco six logo.( it doesnot ask for the conformation also) 

Tried with 5 lipos , but same prob. Plz help  . cant recharge any battery.

Manoj Sharma

What Input supply you are using? check out put of power supply in use.. should not exceed 18V.

I am using a 12V dc wall charger , as u said i have checked the volts . with multimeter it is showing 18.75  and  with other instrument it is showing 15V. 

It is problem with input, use a 12V power supply with atleast 2A and above. I had this problem, bought several DC adapter and none helped. But then i used my Set Top Box power adapter which has out of 12v and 2.5 A. Its now working like a charm

Satya can u please attach a pic of the set top box adapter .

BEst to use one IBM laptop adapter with rating 18V 3.5Amp. it is easily available for 500 in local market, or buy a Desktop SMPS, fetch out 12V supply and feed it to your charger.

Thanks sandeep and Satya. Yesterday had a talk with mr.Vivek and after discussion with him, i opened my charger and checked it. it was giving falty output( Fluctuate) . Bought dc charger of Airtel Dish tv, and now it is working fine. It is a 12 v  2amp output .

Thanks for all.