hmmm....but wouldnt transporting be dangerous too?

its not a nuclear bomb yar , just discharge it and it will travl world

how to discharge it? use it for flying?
new to all these....dont know much abt it.

not dont do that, try your balance charger it has an discharge option(keep the battery some where safe ), or just put an led bulb or brushed motor running with that battery , this will dead your battery and can be saftly disposed off .

Those are the digital chargers, right?
The normal chargers dont have such an option.

yaa, low price chargers don,t have option of discharge....
u can discharge with the help of brushed motor......

Thanks to all participate in this Blog and for your swift reply,

But after that Leak, I removted its outer cover and pined on puffed LiPo, and few water like of liquid come out
then I put Plastic Sticker on it both sides, and belive me I am using this and working and giving proper backup,

I am keeping it now in charged condition and now it is not puffing 

saabaas  gbisht,

i dont think it will give you proper back up .. but if so keep updating ..

Quote from: gbisht on December 27, 2011, 04:04:38 PM
But after that Leak, I removted its outer cover and pined on puffed LiPo, and few water like of liquid come out
then I put Plastic Sticker on it both sides, and belive me I am using this and working and giving proper backup,

Am I reading it correctly? Pinned lipo and charging? Are you guys out of your minds? Do you guys even know what you are doing? You guys are unbelievable.... It seems you got some heavy insurance on your houses...

I was not expecting that kind of rude reply,
I am just sharing my experiance ,

Quote from: vineet on December 27, 2011, 08:11:37 PM
saabaas  gbisht,

i dont think it will give you proper back up .. but if so keep updating ..

Hi Vineet,

Its working fine and now not puffing at all, and even not faced any Heat Problem when I charged it,
I closely monitored it charging time/Discharget time/heat etc,

Pinned doesnt mean I pinned it from one side and that pin come from another side.

Saurabh : Atleast we have to try one, I put that battry so many day outside of home, and done test outside.
--------  also purcased LiPo charging Bag, when I started to keep it in home.
             
Not only LiPo is the only reason for insurance,Nitro Fule is also flamable, but we keet it in home. and somany other thing also.

So Please stop Surprising..

I don't think Saurabh's reply was " rude" by any means. If anything, it showed concern. When you say " pinned", it leads us to assume that the cell was punctured in some way or the other. A punctured cell is extremely unsafe. I personally would get rid of it.

Oh! may be I missunderstood, however I have not seen any blog who pinned/punctured LiPo cells, when it puffed. (only pinned outer plastic cover, thats it)  

" I have not seen any blog who pinned/punctured LiPo cells"

I have not seen any blog who pinned/punctured LiPo cells, when it puffed.

[Moderator Edit] You don't have to use the " Quote" button to reply every time. If you're replying to a post directly above you, please use the "reply" or "quick reply" button instead.

though it's dangerous and very risky but possible, Lipos are becoming so cheap these days, it's not worth taking the risk. I myself won't do this and won't suggest any body to do this. I am posting video for information purpose

Confused... what does "pinned" mean ?  Punctured the one cell that was bloating up ?

For me Pinned mean the same thing as shown in video, make a little hole in battry cover (sliver one) and then let liquid come out, and then close that hole with clue of any good quality plastic sticker.

I have done the same thing as video shown,

There is a huge distinction in the video, and what you described... in the video, "air" is let out, not "liquids".  In the video, it says "if liquids come out, bin the battery".

In any case, I would urge everyone to not take risks by puncturing lipo cells.  That said, I have personally taken out bad cells from lipos (making a 3s lipo into 2s, by removing one puffed cell, then re-soldering the connectors appropriately).  That is a much more manageable solution (assuming you are careful, and sort of know what you are doing in terms of soldering etc).

Quote from: gbisht on December 28, 2011, 12:48:01 AM
For me Pinned mean the same thing as shown in video, make a little hole in battry cover (sliver one) and then let liquid come out, and then close that hole with clue of any good quality plastic sticker.

I have done the same thing as video shown,

may be it happens only in india ,

even i tried that thing , after that every thing is  normal like a healthy battery but now it discharge immedatly , all the best but be carefull...

I have checked old blogs,   and found Vineet you was the guy who suggested me that thing  

Anyways my moto was to inform RC Lovers   , it is working fine  , I am still used some time and its working fine,

also check my LiPo voltages when they are not in use

Thanks 2 All, Specially Vineet....who encourage me to do this  

Quote from: gbisht on December 28, 2011, 01:53:57 AM
I have checked old blogs,  and found Vineet you was the guy who suggested me that thing 
...
...
Thanks 2 All, Specially Vineet....who encourage me to do this 

see brother i know i told you that , but never want to mention again as if some how there is any danger side of this experiment and some body including you, got hurt some how that will be the worse thing for me (but you are always careful , already brought lipo bags that is the smart thing u did) .

and i can only handle danger on me ...

chao.

Hi All,

Finally I asked owner of this Youtube Video, and this is helpfull for all for us.

GaryGraham66 has replied to your comment on Lipo battery repair:

@gauravbisht2000 If it is still working just use it mate. I still use the ones I repaired years ago, I only lost a few due to massive crash damage.