Print Page - Lipo problem

Title: Lipo problem
Post by: Darshan for multirotors on March 22, 2015, 02:15:50 PM

I just got a 1500mah lipo battery for my Tricopter. I connected it to the esc's and a spark came out. A liquidy substance came out from the battery ( I think ) and the cover tore off and the 3 batteries inside were visible. I connected them again but it didn't power up. So I charged it and tried again but still the same problem. Is my battery damaged or can it work again???? ??? ??? ??? :help:

Title: Re: Lipo problem
Post by: IndianHobbyShop on March 22, 2015, 02:20:35 PM

Please post an image of the connector on the ESC (clearly showing the wires of the ESC connected to it).
Also double check the Polarity of the connections that you have made from all 3 ESC's to the battery.

Title: Re: Lipo problem
Post by: sooraj.palakkad on March 22, 2015, 02:46:35 PM

check the esc terminals with a multimeter for a possible short circuit that might have occurred while soldering the connectors.

Title: Re: Lipo problem
Post by: Darshan for multirotors on March 22, 2015, 02:50:25 PM

sooraj i fixed it and tried but not working

Title: Re: Lipo problem
Post by: Darshan for multirotors on March 22, 2015, 02:57:14 PM

just the electronics

Title: Re: Lipo problem
Post by: sooraj.palakkad on March 22, 2015, 03:12:37 PM

all your connectors seems close together, and the motor leads are uninsulated, causing more chances for a short circuit.
the battery have undergone serious damage due to the short circuit, check each cell separately. and before testing another battery, make sure all connectors are perfectly insulated.

Title: Re: Lipo problem
Post by: Darshan for multirotors on March 22, 2015, 03:15:11 PM

I don't have heat shrink.. Can I use electrical tape as insulator?

Title: Re: Lipo problem
Post by: Darshan for multirotors on March 22, 2015, 03:16:15 PM

And how will I check each cell?

Title: Re: Lipo problem
Post by: Rcjabalpur on March 22, 2015, 03:22:36 PM

Electrical tape will work (heat shrink is recomended) . You can check each cell with a lipo checker , but write this battery off (it will only cause more problems) .

Title: Re: Lipo problem
Post by: sooraj.palakkad on March 22, 2015, 03:33:55 PM

you can check each cell with a multimeter in voltage range , you can access individual cell terminals through the balance lead in LiPo .

Title: Re: Lipo problem
Post by: Darshan for multirotors on March 27, 2015, 05:10:54 PM

I pressed the lipo a bit and it started working... But it can stop again...so .anyways thanx for the advice

Title: Re: Lipo problem
Post by: K K Iyer on March 27, 2015, 05:29:04 PM

Quote from: Darshan for multirotors on March 27, 2015, 05:10:54 PM
I pressed the lipo a bit and it started working... But it can stop again...so .anyways thanx for the advice

Please DO NOT USE THAT DAMAGED LIPO

You may not believe it yet, but it is too dangerous.

See a sample here:

[url=http://www.rcindia.org/electric-planes/zattack]http://www.rcindia.org/electric-planes/zattack (http://www.rcindia.org/electric-planes/zattack)
[/url]!!/msg206067/#msg206067

Title: Re: Lipo problem
Post by: Darshan for multirotors on March 27, 2015, 05:34:54 PM

Do you have a battery applicable for a Tricopter? Cause I need it urgently

Title: Re: Lipo problem
Post by: Himadri Roy on March 27, 2015, 08:52:36 PM

Darshan i have a turnigy lipo...

Title: Re: Lipo problem
Post by: Darshan for multirotors on March 27, 2015, 08:56:49 PM

Sorry I already ordered one from eBay. . Thanx for helping anyways

Title: Re: Lipo problem
Post by: Himadri Roy on March 27, 2015, 08:57:32 PM

no problem bro...happy flying ;D

RC India

RC Equipments => Batteries and Chargers => Topic started by: Darshan for multirotors on March 22, 2015, 02:15:50 PM