Feedback on Zippy FlightMax lipos

Started by anwar, December 16, 2009, 04:07:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

anwar

Anybody here using the brand of lipos named "Zippy Flightmax" ? 

Feedback requested, as me and some others at the field are going to get a bunch of lipos of various sizes for all of us.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

rcforall

Don't know of flight max  but I have been using Regular Zippy batteries of 11.1V 4300 mah  for the past 2 years  and barring some soft puffing up they have been great and have taken a lot of abuse.
They are good.

Sai

BTW if you let me know what you want I could possibly check out with desire power and get them shipped to you. ;) 8-)

www.zuppa.io : vehicle telematics, ADAS, IoT , Drones

ujjwaana

I have seen them in Jakkur with seniors like Aadarsh, Abhay, Prashant etc. Abhay had good review for them. A couple of them are already on the way for Vinay and Me! Sio crossing our fingers!

some one told that 1S Lipos are available in local Electronic market in SP Road, Bangalore. Anybody tried making 'Batteries' from individual LiPo Cells. I know its job for seasoned soldering skill and need specialized (cheap) tools like non conductive tweezers/clamps (I bough such tweezer for 90 bucks, after nearly shorting my LiPo while puttign a Dean).
Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother

anwar

I know of someone who was using a Zippy (regular) lipo for his TX, and another flyer on our field just started using couple of 6s 5000mah ones about 3 weeks ago for his Trex 600 electric heli.  It is too early to base a decision on those two data points alone.

Since we are planning to get a pretty good number of them, I wanted to get a general feedback.  So far, it looks just as good as any other brand, with no specific issues.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

chanvivek

Hi Anwar,

I have been using Zippy Flightmax pack on my Tx for quite sometime now.  They are superb.  And they come with both the Futaba plug and the JR plug.  So I can swap between JR and Futaba.  Thats just the Tx Lipo!!

My friend here in Chennai has been using 6s 5000mAh Zippy Flightmax packs on his Trex 600 here.  Saw him even yesterday and he was very confident about these packs.  Provided the charger is good, I dont foresee any difficulties with these packs.  I would personally go in for Hyperion though the cost would be higher. 

BTW I have ordered an ICharger capable of charging upto 20Amps!! The same friend who has the 6s Flightmax has been using the Icharger and claims it to be super good at balancing! Waiting for the charger still!!

- Chan

vinay

As Ujjwal said, they are used extensively at jakkur. And on the US RC sites pics, I see that many use more of Rhinos. One thing I noted that as you go smaller in size like 1Ah, compared to turnigy these flightmax, Rhinos are longer in size and slimmer, where as turnigy are fatter and shorter. Just my tip if shape mattered :thumbsup:

Hellyflyer

Hi Anwar,

I too am using a Zippy flight max 1500 Mah 3s lipo on my HBK II very nice battery does not get hot at all only warm even after a continous hover give's me around 10- 12 mins. I would recommend this all.

Amit
Helis and Quads ROCK !!

jerry

#7
Hi Anwar

I am using "Zippy Flightmax" and Rhino LiPo batteries for over 3 years. I got all of them from Hobbyking. I never had any issues. I consider Rhino batteries superior since they are light, deliver exact Amps and they are usually compact when compared to "Zippy Flightmax". I have

1000mAh*5
1500mAh*7
1750mAh*2
2200mAh*4
3000mAh*3
4200mAh*2

I love both of them :)
Jerry Thomas Azhakathu

raja_mastana

I feel performance of Rhino lipo are much better than zippys and nano techs (i couldnt find much difference between the zippys and nano techs)
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

sushil_anand

Never tried Rhino but am using Zippy Flightmax 3S 2200mAH 20C, 2 of which were used ones from a forum member. My electric flying is not too much but I have no issues with them so far. I do not use the balancer on a regular basis but have been monitoring the cell voltages. They hold to within a couple of millivolts difference, at most.

And when you factor in the price, they are well worth it. Even better when HK has a sale - got 3 @ USD 6.99!

In fact, I had severe problems with the Dong Yang brand, bought at a rather high price ( of course that WAS quite some time ago) , from a known source in India. They turned out to be plain awful and had to be discarded very soon.
Hangar: Zlin 50L -120, CMPro Super Chipmunk, Ultimate Bipe EP, Imagine 50, Christen Eagle 160, Ultra Stick, Super Sports Senior

Siddharth

Our experience with the "Zippy Flightmax" hasnt been really good. We have had close to 25% of the batteries arriving faulty (connection break, low voltage). Another 25% of them have bloated or gone kaput after 6-10 runs or so.

But the remaining have been performing flawlessly. We have used the 2s,3s with 4500mah to 5500mah with 25c to 40c discharge.

So in the other words, if you do get lucky, nothing can beat them in sheer value.
*Garage is Empty*

Madness begins in March 2012!!!!!!

mohan

Anwar Bhai,
My personal experience with Zipppy Filghtmax has been really bad. They do not balance :banghead:. I would recommend Turnig Lipos.
Regards,
Mohan
Baner Aeromodellers Association Pune.

clayboy

#12
i would have a look at voltz lipos, very light and seam to deliver good power and fairly inexpensive

think they are made by desire or same factory
henseleit TDR v-bar5,1
henseleit mp xl-e v-bar 4,0
logo 600 v-bar 5,1
logo 400 v-bar 5,1
rave 450 mini v-bar 5,1

SunLikeStar

Light and expensive i can trust, light and inexpensive means the capacity has to be overrated 8-)

clayboy

Quote from: SunLikeStar on February 01, 2011, 09:37:19 PM
Light and expensive i can trust, light and inexpensive means the capacity has to be overrated 8-)

if u say so
henseleit TDR v-bar5,1
henseleit mp xl-e v-bar 4,0
logo 600 v-bar 5,1
logo 400 v-bar 5,1
rave 450 mini v-bar 5,1

vinay

Voltz are not cheap lipos as flightmax or turnigy, They are Fairly better than most of the lipos sold by HK! what clabboy meant is that they are inexpensive compared to other big brands like hyperion etc and perform the same like the bigger brands.

For people complaining about cells not balancing, check your chargers they are the culprits! I have seen 2 to 3 chargers, the 50 watts one burning the soul of the cells slowly on each charge beacause of the way they shunt current during balancing.

anwar

I have no significant problems with the Zippy ones.  So far, lost only one due to what seems like keeping it under full charge for 4 months or so.  The others balance well, and even better with the iCharger.

The recent one I purchased are the Nano-tech ones though, that was based on the higher charge and discharge ratings though.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

bmanoj2

I am using them for almost 2 years, only onebattery out of my entire collection give me problem by slight swelling, but still works fine. I prefer them compared to Rhino, as I have couple of bad experiences with rhino.
"Learn from yesterday, live for today, hope for tomorrow."

SunLikeStar

Quote from: clayboy on February 01, 2011, 10:06:05 PM
if u say so
???

From what I've heard, turnigy and Zippy are made by the same vendor and the differences are; capacity mentioned on a zippy is the maximum capacity and capacity mentioned on turnigy is the minimum capacity. Also the zippy I have says max charging current 1C and all my turnigy's say charging current 2C.

clayboy

blue zippys have a old formula and do not hold volt very good

a lot of the cheap batteries faking a c rating by having bigger capacity then is marked on the label witch make them bulky and not holding volt so good in the end of the discharge

easiest way to check is to do a discharge to 3v and c how many mha is going out of the battery and back in again, from there u can set your 20% rule if u practice that 1
henseleit TDR v-bar5,1
henseleit mp xl-e v-bar 4,0
logo 600 v-bar 5,1
logo 400 v-bar 5,1
rave 450 mini v-bar 5,1

divay99

Zippy = excellent value for money.....
Divay Puri
+91-98-119-63278
https://www.facebook.com/#!/groups/NOIDAAEROCLUB/
http://www.amai.in/noida.php
FUTABA T6EX|FUTABA 8FG|SEAGULL 40|SEAGULL FAIRCHILD -PT19|PIPER CUB - 90"|EDGE 540 EP TMPRO|YAK 54 .60| Mustang P51 .40|AXN FLOATER JET|HK Bixler|REACTOR 3D EP|U CAN DO 3D| Blitz SkySurfer|EDF Jet T-45 Goshawk|HK-450 GT PRO|Seagull PC-9 .91|Edge 540 20cc|Reactor 50cc|PC-9 30cc|SU 26 30cc|HK 450 GT|Hirobo Evo .50|MXSR 50cc|Tarot