Text only | Text with Images

RC India

General Topics => Beginners Zone => Topic started by: Ahmad Ilyas on January 28, 2015, 04:43:46 PM

Title: 2 servos alierons
Post by: Ahmad Ilyas on January 28, 2015, 04:43:46 PM
i mde up few planes with alierons using single servo
can anybody tell me how to make alierons using 2 servos
Title: Re:
Post by: docnayeem on January 28, 2015, 04:51:07 PM
Just install two separate servos for each aileron and then connect them ( wiring) with a Y connector.. All the best
Title: Re: 2 servos alierons
Post by: Ahmad Ilyas on January 29, 2015, 08:50:33 PM
where can i get it and i have never seen y connector in STOCK at rc bazaar
Title: Re: Re: 2 servos alierons
Post by: arun.sreelakam on January 29, 2015, 08:58:01 PM
Just wire directly.. connect similar colours.. and you are done.. :)
Title: Re: 2 servos alierons
Post by: Ahmad Ilyas on January 30, 2015, 02:41:56 PM
sorry i didn't understand
Title: Re: 2 servos alierons
Post by: sahilkit on January 30, 2015, 05:16:19 PM
http://rcbazaar.com/category.aspx?categoryid=144 (http://rcbazaar.com/category.aspx?categoryid=144)
Title: Re: 2 servos alierons
Post by: sahilkit on January 30, 2015, 05:27:56 PM
See the image, connect two servos via servo Y-harness to receiver channel and install them as shown in the picture. The servo arms act/move/travel in opposite direction.

(Image taken from net)
Title: Re: 2 servos alierons
Post by: sahilkit on January 30, 2015, 05:40:46 PM
http://www.angelfire.com/indie/aerostuff/ServoLayouts.htm (http://www.angelfire.com/indie/aerostuff/ServoLayouts.htm)
Text only | Text with Images