This seems to be a perfect Floater for all those who are wanting to get into RC flying. The only catch is that you will need some 6 or 8 mm Depron/Bio foam/Foamcore.

FREE PLANS available + more....................

http://www.armadamodels.co.uk/non_architectural/ctd/delta.htm


One question for the experts - if I were to angle the vertical tails outwards at 30 degrees (purely for aesthetic purposes), how would it affect the flying characteristics of this model? Compare the vertcal tail formation of the F15 Eagle with the F18 Hornet and you will know what I mean.

Regards.

Very simple and easy. Nice build. apart from that the dog chasing the plane is superb.. 

Excuse me, he is NOT an ordinary 'dog'. He is the Chief of the Ground Crew.

my apology.. VC Sir.

Quote from: VC on February 10, 2014, 09:59:36 PM
if I were to angle the vertical tails outwards at 30 degrees (purely for aesthetic purposes)

VC
cantered fins improves lateral stabilty while retaining all goodness of directional stability, you could reduce dihedral with cantered fin (Look at it like an extreme dihedral wing)

The best part of this forum is that when you need help, more often than not, it comes from EXACTLY the persons you need it from.

Thanks Captain.

sir,can a new comer build this model? i interested in pusher type plane..

Seen the plan. Found not in scale and with lot of Angle measurements for cutting.
Wanted to test my AUTOCAD skills after longtime. Took 20 minutes to draw.
Attached full scale pdf.
Anyone needs change in scale feel free to request
copyright owned by armadamodels.

Wonderful attitude! Thanks.

VC sir
I have to thank you to share this model.
I am planning to build it for my daughter.

is it possible with locally available EPS (thermocol) !

The day Vc sir posted link for this plane , i have downloaded it for my next build , but didnt manage to start the build.
@ Alex   sure it can be build with Thermacol.

 ok  manojswizera ..
i will be needing

2 no.s mini servo
ESC
TX/RX
Lipo -- (which battery will be suitable ?)
Motor--(which motor will be perfct?)
Prop --

All you need is
2   9-grams servo
1   20 amp ESC
1   1000-1500 mah 3S lipo ( Charger also)
1   CF2822 motor 1200kv  with 8 or 9 inch prop.

Tx and RX ( Delta mixing TX )

Thanks

Laid the items in different orientation to reduce number of pages (20 pages to 16 Pages of A4).
Scale and print the drawing in Reply#7 in A4 size for reference.
Use this pdf to print in full scale in tiled pages

ok i will try it out.
in this pdf the image is in 1:1 scale right !!!

Quote from: alex borua on April 03, 2014, 01:10:10 AM
in this pdf the image is in 1:1 scale right !!!

Both PDFs are full scale 1:1. In the second pdf the items were rotated to fit in small size paper resulting to reduction in number of tiled pages.

hi all


please post tiled plan if anyone have....


Thank you.......

Hi ramarao
are you looking for printable A4 size tiled diagrame of this Delta

Hi
You can print the pdf in Reply #15 into Tiled A4 pages.
See the image attached.

Quote from: ramarao on April 03, 2014, 06:18:31 PM
hi all


please post tiled plan if anyone have....


Thank you.......

rcparkjets     yes you are right....  all printer software have this poster option ... 

This wing is not dihedral in this plane. Will it make more difficult to fly?