which things from the scrap can be used as Push rods?
I m a beginner in this hobby but have wide knowledge in Aviation..i have searched hundreds of pdf plans but m not confident on that...for now i have decided to build sport trainer http://www.mikeysrc.com/Sport-Trainer-Build-Videos.html ... So please suggest me if it is fine..or i should choose some other plan...also suggest some good plans other than this...is it ok if i build a delta wing plane as my first plane...i m attaching pics of electronics i have for ur reference....also advice me which material should i choose for building it...I stay in delhi and here only Depron(biofoam is available).

Check out

http://www.rcindia.org/tools-materials-and-building-techniques/pushrod-design-basic-any-tutorialsignificant-text/
http://www.rcindia.org/electric-planes/mr-moss-glider-arf-kit-step-by-step-build-guide-(from-rcforall)/ for electric trainer.
Also just search 'push rods' on this site itself. Loads of information available with links to other sites also.
By the way where do you buy Depron in Delhi?

http://www.rcindia.org/tools-materials-and-building-techniques/material-sources-foam-board-coro-sheets/msg22956/#msg22956

Thanks, was just confirming.

Aman

You seem to have collected a lot of stuff before deciding on the kind of aircraft you wan't to start with!

I would suggest that you get in touch with someone who flies electrics (since you have a lot of material for these) at your local field. He would be able to guide you on how to get started.

Support from an experienced person will help a lot in reducing the heartburn of early days!

Good luck!