Need help to design a new wing..

Started by roopeshkrishna, May 24, 2012, 12:57:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

roopeshkrishna

   All respected Modellers.. and especially Seniors and experts in RC aeromodelling, i need some great help from you all to design a new wing for a new craft..my idea is to make a good plane that flies at walking speeds.. so it must floats and glides.. basically, i hope it must be a long spaneed wing, that must can be done with coro.. no tight turns is needed.. so please adivice me to achieve this, from all of your experience.. when completed i will share it all back to RCI, as all we can benify from it.. hope this one may helps a lots, and a lot more modellers to fly at piece of mind even cool manner.. so, my querry is these..

a long spanned wing.. almost 70 inch.. with diehedral, or anhedral..? or poly hedral..?
straight wing, or tappered tips..? if tappered, from leading edge to back, or in reverse..?
length between the main wing and tail plane..?
length between the main wing and nose..? as usual..?
need any extra large rudder surface..?
need any extra large control surfaces..?

please advice me once.. its a kind request to you all.. from your experience.. it must be a slowest flyer possible, that can be even hand launched.. with great hope.. :salute:
Phoenix.........

roopeshkrishna

if span is 70 inch, what must be the chord..? 7, 8, 10 inches..?
Phoenix.........

roopeshkrishna

Phoenix.........

madhavan

Quote from: roopeshkrishna on May 24, 2012, 03:39:16 PM
seniors.. need advice.. please.. :help: :salute:
kurachu bhothimutaanu chetta ,,oru masam wait cheyyuu aarum marupadi ayachilengil samipikkuka ,,,ennum eppozum evideyum adrishyanaai ,,njaan undaakum  ninte koode ,,sunpackil  kali nadakkilaa ..vere or material undu .samayamavate paraghu taraam.

madhavan


roopeshkrishna

Phoenix.........

amit_delhi

Quote from: madhavan on May 24, 2012, 04:41:07 PM
kurachu bhothimutaanu chetta ,,oru masam wait cheyyuu aarum marupadi ayachilengil samipikkuka ,,,ennum eppozum evideyum adrishyanaai ,,njaan undaakum  ninte koode ,,sunpackil  kali nadakkilaa ..vere or material undu .samayamavate paraghu taraam.

Google Translate detected language as Swahili and translated it into:

"kurachu bhothimutaanu chetta, सैम ओरु प्रतीक्षा cheyyuu marupadi ayachilengil samipikkuka,,, ennum eppozum evideyum adrishyanaai, जान undaakum नहीं koode, गंभीर sunpackil nadakkilaa के .. Vere सामग्री या मुर्गा कंघी आयोजित किया samayamavate रघु taraam."

:discuss:

roopeshkrishna

Amit.. it goes this way..
"kurachu bhothimutaanu chetta" = hey brother its some difficult..
"oru masam wait cheyyuu aarum marupadi ayachilengil samipikkuka "= wait for one month, then no reply, will ask me..
"ennum eppozum evideyum adrishyanaai ,,njaan undaakum  ninte koode" = always will be with you, as invisible..
"sunpackil  kali nadakkilaa ..vere or material undu .samayamavate paraghu taraam" = its not possible to do with coro.. have an other material.. is found nothing.. will tell you.. :salute: nothing can translate our own.. :hatsoff:
Phoenix.........

amit_delhi

Roopesh Sir, sentiments, emotions, bonding, love, human behaviour.....It will always be better if technology stays away from these...I am not talking about translation...It should improve to translate regional dialects too...

roopeshkrishna

Phoenix.........