Hello, I am Ayush
I am making my first plane.
Its weighs roughly 500-750grams.
wingspan: 70cm
Made of Balsa

i am thinking of using a 1500-2000kv brushless motor with a 25-30A ESC.
I plan to run these by a 11.1V 2200mah LiPo battery
Also i want to use 5 servos here.

Is this configuration suitable for my plane?
please advice

You need two more parameters. What is the thrust/wattage of the motor ?  And what prop are you going to use ?

Please see this thread, as a starting point : http://www.rcindia.org/electric-power/amp-rating-and-motor-size/

dude where will u use 5 servos on a small electric

Hey pics of the plane also.

@Anwar
Thanks for the link anwar, its very helpfull.

I need about 250watts, i want a bit of aerobatics from this plane.
please advice any other suitable configuration for my plane.


@akky
i need 1 servo-elevator, 1 for rudder rudder and 2 for aileron control.
the fifth is just for some funky stuff like canopy and landing gear.

@rajathv8
sorry the i cannot upload the pics now as its not yet complete, i'll upload as soon as it takes a good shape. its still under work.

Quotei need 1 servo-elevator, 1 for rudder rudder and 2 for aileron control.
the fifth is just for some funky stuff like canopy and landing gear.

if ur using retractable lading gear u need three like these and those are special retract servos
and i totally cannot thing why will u use servo on the canopy

Hi Ayush,

Keep posting your photos before its completion. The build log helps a lot and we are waiting.. all the best

Regards,
Dileep

Quote from: akky on November 21, 2010, 10:53:36 AM

Quoteretractable lading gear u need three like these and those are special retract servos
and i totally cannot thing why will u use servo on the canopy

I already have extra servos so i thought why buy more, i can do the retracting thing with the normal servo too. The canopy thing is still just an idea, i just wanted to have your advice on my maximum requirements.
Akky sir could you please advice me on motor and ESC configuration for this plane ??

guys
my plane weighs  about 450 grams ....
and i want to use the following  electric gear

Motor : 1270kv ; 204 W ; Max amps=18 ; Max trust 970 gms.        i want to use these same parts in larger models

Mystery 30 Amp  ESC  with 5v/3A BEC     is this  Enough for the motor ??

Turnigy  1800 mAh ;3s1p ; 20 c  Li-Po   can i get a flight time of 12-15 min ?

and using 4-servos  of  9gm each

and a 6Ch transmitter { image below }   is this good ,so it can be used  till  i advance to an intermediate  level ??

what charger should be used for the above stated Li-Po ??  how much will it cost ??  {I have real low amount to spend on this}




waiting for your suggestions  .... 

ajith

Go through RCIndia Gems http://www.rcindia.org/rc-india-forum/the-rc-india-gems/
Spend some time reading this.You can find all related information there.

However your selection of motor, ESC and battery are all right. ESC is enough for motor and battery will give you 12-15 min. Transmitter is also ok. I will suggest you to go for atleast 50W charger like this
http://rchobbyaddict.com/index.php?cPath=37&osCsid=49586a71415b75abf3e912a223aae541
if you want to stay longer in hobby.

thanks  spitfire

i have gone through the forum....
and decided with that charger ........  


Now i'm  in  need  of   plans  
Paper printable templates    

i am planning to build a  plane like Cessna   or  Piper  or a blu baby     with  foam as   a   Beginner  plane     and  what i want my plane  to look  is  some thing  like this (below)..                                             With  solid wings >>> (second  image)


                                        Urgent  help needed    

Here are lots of plans with the pic of plane.

http://www.rcgroups.com/forums/showthread.php?t=1333878

thanks  spit  fire ........   
seems  it helps .....
will start  building  2mro ... or day after