I am about start scratch building a foamie rc plane and started buying parts-items required, felt having a check list / ready reckoner would be handy for newbies who are just getting in to this hobby. with my extremely limited knowledge i have come up with the list of requirements below. "Experienced members are requested to add to the list to make it complete" :help:
1.Depron / Biofoam sheets
2.landing gear
3.wheels
4.pushrods
5.hinges
6.Control horns
7.servos
8.Lipo power pack / battery
9.ESC - electronic speed controller
10.Brushless Motor
11.Propellor
Tools:
1.Hobby knife set
2.Compass set
3.metal ruler
Consumables:
1.glue gun / glue sticks / glue
2.Glue tape
3.gold connector
4.extension wires
Senior / experienced members please help to complete the list so that it can be a ready reckoner in a true sense.
:help: :help: :help:
xt60 connectors
Sent from a potato using a lamp
Some thin ply to mount motors to foam fuse :)
Velcro to attach the battery, esc etc. And zip ties of many different sizes(these are indispensable.
You can also consider wood or carbon spur, 5 Min Epoxy, some colored Tapes, Sand Papers, Favicol Decoration Glue, Glass Fibre tape or simple transperent tapes to secure edges of foam etc.
Also some Fibre tape for reinforcing very useful ;D
And some linkage stoppers for servo arm to pushrods connection, not a necessity but its great to have them ;)
prop savers....... can be used for different purposes like wheel mounting.... extending servo rods etc.
aniket210696
Thanks for the suggestion :) will include in the list.
checked online but can you tell their exact usage.
RCNeil21
Thanks a lot for the items suggested will include in the list
googled but still unclear :banghead:
sorry to ask but what is the usage of linkage stoppers for servo arm to pushrods connection,
LastRites,
Rightly said boss zipties and velcro definitely indispensible
will include the items suggested in the list.
thank a lot
Mjet
Thanks a lot for the suggestions will include all in the list .
But what is the use of carbonspur googled for it but did not understand. :banghead:
carbon Rods, cutting board, sand paper
1.you can use cycle focks as push rod.
2.spiral binding cover or lamination covers as hinges.
3.old ATM cards as horns.
Sagi just go to google images and type linkage stopper you will understand ;)
And a carbon spar is used to strengthen and reinforce a wing it goes inside the wing.
kaarthic.r.b
Thanks for the suggestions, very very valuable
:hatsoff: to the great indian jugaad
makes great sense to use the alternatives you have suggested :)
RCNeil21
Got it boss
thank you :)
xt60s are connectors between the esc and battery.. better than T-connectors IMHO :P