Hi guys ,
Thought this thread would be helpful for the begginers who are trying to build ARF's or Kits to avoid mistakes :) .
Please post mistakes you've made while building and also possible mistakes so all of us can try to be careful .
Thanks ,
Sahevaan
some mistakes" not made by me but possible"
while assembling ARF.....
1> always first assemble the wing...
2> make sure u align it properly with the center... or u may end up having different incidences on both wings
3> assemble the wing and check faults
3>check the align ment of the tail and the fin.... tail tips should be same distance from the wing LE on both sides..
4> check from front and check the elevation of both the tips or virtual gap between the wing and tail to be same on both the sides....
5> assemble electronics keeping sufficient distance
6>make sure the servo horns do not touch each other during motion.... (specially if all the servos are in the center and the wing has its ali servo in the center... in small planes there are maximum chances that the servo heads may touch each other)
7>check the CG its of vital importance....
* finally
MANUALS ARE THERE FOR A REASON ....... TAKE TIME TO READ IT......