help me to learn basics

Started by Laksh, July 25, 2014, 06:58:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Laksh

July 25, 2014, 06:58:02 PM
hi friends could you please help me to know about a normal robot which can do operations go forward,backward,rotate arm left and right based on instructions given from a remote.i want to know what kind of processor can be used there,it's schematic diagram and circuit diagram?if you don't have time,please guide me by mentioning some useful links.Awaiting for your kind reply...

rcpilotacro

#1
July 25, 2014, 07:55:22 PM
welcome Laksh

havent seen much around here on surface robotics, need to look elsewhere buddy, stay around though
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

Avadhut10001

#2
July 26, 2014, 12:11:07 AM
Turnigy 9x with frsky

DIY flight controller quad , kk2.1.5 , dji 450 , DIY frame, 3d printing service

K K Iyer

#3
July 26, 2014, 12:23:27 AM
87000 views.
Wow!
:hatsoff:

Avadhut10001

#4
July 26, 2014, 11:55:08 AM
thank you ..Iyer sir :)
Turnigy 9x with frsky

DIY flight controller quad , kk2.1.5 , dji 450 , DIY frame, 3d printing service

Laksh

#5
July 29, 2014, 11:45:04 AM
Thank you Avadhut.....
Print
Go Up Pages1
User actions