Hi All
Building "old fogey" rc plane from a kit, the weight is about 550 gms.
Request members to suggest if the below electronic setup is good to go?

BLDC1200KV01 A2212 1200Kv Outrunner Brushless Motor 

30 amp ESC

1000MAH 2S 30C/60C

Should be okay.
Use a 8x4 prop.
A 3S battery is recommended.
Since the kit is heavier than the flitetest specified original weight.

Thanks Prabal,
550gms is including 1000 mAH 3s lipo.
I am planning to use 2s though!

It should fly well.
I trained on that plane.
Keep the throws low and expo high.

Thanks Prabal,

Will go-ahead and place order for the above electronic combination.

Go on.