Print Page - Flight basics using a model made from styrofoam plate

Title: Flight basics using a model made from styrofoam plate
Post by: anwar on January 06, 2010, 09:44:47 PM

{:)} :salute:

http://www.howcast.com/videos/174365-Aerolabs-FPG9-How-To-Make-a-Foam-Airplane-Out-Of-a-Paper-Plate

Title: Re: Flight basics using a model made from styrofoam plate
Post by: Tanmay.mathur on September 07, 2014, 12:30:11 PM

What ir esc and bec and do we use a motor directly to rx without a esc/bec?and how to rotate a servo continously for driving a heavy rc tank ? Thanks

Title: Re: Flight basics using a model made from styrofoam plate
Post by: utkarshg13 on September 07, 2014, 01:04:52 PM

Hello Tanmay..
Please spend some time reading: http://www.rcindia.org/rc-india-forum/the-rc-india-gems/ (http://www.rcindia.org/rc-india-forum/the-rc-india-gems/)
Hope you will find all your answers and many more things as well.

:hatsoff:

Title: Re: Flight basics using a model made from styrofoam plate
Post by: miginstruments on September 07, 2014, 11:58:23 PM

y ru using the servo. is it to drive the tank.

Title: Re: Flight basics using a model made from styrofoam plate
Post by: utkarshg13 on September 08, 2014, 12:34:20 AM

Hi Tanmay,
For driving a heavy RC tank you need DC geared motors instead of servo motors. DC geared motors will give you required torque. What is the weight of your tank. Also, you need to design something that could control your motor through RC.

Title: Re: Flight basics using a model made from styrofoam plate
Post by: Tanmay.mathur on September 08, 2014, 06:23:24 PM

Thanks. The link was helpful and the weigh is more than 1.2 kg the size ìs about 15 x 10x 9 cm the r lbh respectively

RC India

General Topics => Beginners Zone => Topic started by: anwar on January 06, 2010, 09:44:47 PM