Built my second plane ever after my Spitfire crashed and I needed some parts to repair it.
Picked to build the Slinger since it's just too awesome a design (again, thanks a ton flitetest.com for the awesome design)

Here is what went into it.

Specs:
Construction - Dollar Tree FoamBoard (40" Wingspan)
Original Motor - Aerodrive SK3 2822 1740kv (got burnt during testing for no reason at all)
Current Motor - NTM Propdrive 2826 1200kv (scavanged from my downed FT Spitfire)
Servos - Hextronik HXT900 9gm
ESC - Turnigy Plush 25 AMP ESC
Propeller - APC Style 8x4E Prop
Battery - Turnigy 2200mAh 3S 25C
Receiver - FrSky X8R
Transmitter - FrSky Taranis Plus
Weight - 450gm w/o Battery

Extras:
Paint - Regular Spray Paint

And then painting it..

Great builds. Best wishes for a successful maiden.

awesome paint job

 

post a video of the maiden flight too if possible!

Great Paint Job .Best of luck for maiden.did you buy the sbk

very nice Pratyush, look forward to the maiden.

hey
me too hv built the same plane long ago wing yet to build and horizontal,vertical stabilizer yet to install


here r the pics

wow these are amazing i want too build one tooo
where can i get dollar tree foamboard and hextronic servos
and which paint you chose

i prefer to use  color tape rather than paint it
tough to fly due to low wing and takes quick  turns in fraction of sec

yeah its a good idea
but where to get dollartree foamboard
where to get poster board how much will it cost