help needed frm mumbaikars

Started by suryanshu, March 27, 2011, 08:34:35 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

suryanshu

hello ,
i am a starter for RC planes ... made few a designs fr fuselage n wings in ACAD
hav many options fr d rest of materials...
unable to decide what to go for  ??? 
need to meet in person with sumbody who can actually guide me...
tired of hearing that first 2 or 3 planes crashes.....dont want it....
please help.........

anwar

Hangar : Please see my introduction.
RC India forum and me : About this forum.

pvn2000

whats ur number and location ,,there are many helping hands in mumbai

suryanshu

My no is 9821078924......n m stayin in THANE

suryanshu

Planning to go with this design .... not sure how effective it might be

having some alterations in mind such as
> rudder just behind the nose
> elevator in the small wing at front 

sandeepm

Where in Thane???
I am at Godhbunder Road, Vijay Garden
Sandeep
Fly high if you have good set of batteries.....!

ashJR7202

it is gud design!!! but not for beginners!!!!this is for intermediate or advanced flyers!!! u can contact pvn2000 for trainer model...or build some trainer model out of biofoam.

u can also visit Airoli flying field where we regularly fly, sandeep can  help u on this.....
Hanger: Mini Yak-54| 210 Phantom | SU-47| F-15| EuroFighter|Scrappy|SU 27|Eurofighter|Sukhoi PAK FA
Blade MCX| Blade CP PRO
JR XP7202| DX7

SunLikeStar

+1. You will need two experienced flyers for this, one for flying and one for hand launching it.
Try this one http://www.rcgroups.com/forums/showthread.php?t=921481
You'll have more fun and less heartburn :thumbsup:

suryanshu

i m staying at ghodbunder road too....Hiranandani Estate.

with dis plane i m plannin to participate in d aviator show at IIT bombay.
der are special prizes for best design...of d various planes dat i've seen in my last visits
all r almost similar...straight high winged..with propeller in d nose..dats why planning to go wid dis

suryanshu

@ash i may not be able to visit airoli flying field soon coz my xams r cming up.
wld cum oer der definitely by d end of june wen my vacation is starting..

iamahuman

Quote

7 ) Please refrain from using SMS language/shortcuts on the forum.  Take a few seconds more and write in full sentences... that makes the matter easily readable to everyone.


Please follow this. :)
"Chuck Norris once overcharged a lipo. Thank him for the Sun."

SSC LCG Slash 4x4.
JQ THE eCar.

sandeepm

Hi Suryanshu,
I dont know about ur flying skils. i hope u r well experienced to fly these models with canards.
if not then dont build and fly this model. go for a trainer home build plane. if you need any help call me on 9967049844.
Sandeep

Fly high if you have good set of batteries.....!

obraganza

Hi,

I have a scratch built Slowstick 0.62 scale made by myself. I have gained some proficiency in flying by using the FMS simulator (and my Transmitter). However I am still do not have the confidence to maiden my aircraft. I live in Mumbai (Ghatkopar West) and my estimate of the open area required has greatly increased after actually testing the plane (on the ground only). Is there any large open place in Mumbai where this is done regularly, or people meet and try out this hobby. I would certainly like to do it under guidance from fellow seniors. Any response or guidance will be of great help.

Neil


anwar

Merged into existing thread about getting help in Mumbai.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

Vector

suryanshu,
we are neighbours then!

suryanshu

Vector where r u staying.......in rutu estate ..

Vector

no, I am from Vile Parle but often visit my sis's place at H.estate, next to yours. I fly in Pune and Airoli. Infact i was there yesterday !

obraganza

Guys

Can someone tell me where exactly the airoli flying field is located (Address) and if possible directions to get there from Eastern express Highway

Neil

Vector

hi there, dnt know exact add but heres what i know..

from Et.Exp. highway,(going towards Thane) turn right for airoli bridge.. after x'ing over, you come across a circle...go straight towards Thane-Belapur highway..take a left for Kalwa...after 2-3kms (before the muni. corpn. 'arch' & subw-way) you'll see a left turn leading towards a wide open area with a few new/undercontruction office buildings on both side of this road (this place looks like bandra-kurla complex). 1/2km down people fly on rightside of this road. Its a huge ground good enough for ANY kind of plane !

For further info contact AshJr.

saurabhhsrivastavaa

Cheers !!!
Saurabh
+91 7977382130

sushil_anand

#20
Quote from: Vector on May 02, 2011, 02:34:29 PM
from Et.Exp. highway,(going towards Thane) turn right for airoli bridge.. after x'ing over, you come across a circle...go straight towards Thane-Belapur highway..

No. At the circle you turn LEFT. Head straight down. You will see PATNI COMPUTERS. The field is adjoining this.

But, I am informed that Patni have taken over part of this ground. I have no idea of what is left and whether it is still usable for "ANY kind of plane".

Ash is a regular and will elaborate.
Hangar: Zlin 50L -120, CMPro Super Chipmunk, Ultimate Bipe EP, Imagine 50, Christen Eagle 160, Ultra Stick, Super Sports Senior

Vector

#21
Sushil_anand,

Obviously, that land would belong to somebody...but when was it 'taken over' ?

anwar

Hangar : Please see my introduction.
RC India forum and me : About this forum.

Vector

theres no confusion anwar,
just that we took a different route to reach the same place.

ashJR7202

Quote from: sushil_anand on May 02, 2011, 03:18:45 PM
But, I am informed that Patni have taken over part of this ground. I have no idea of what is left and whether it is still usable for "ANY kind of plane".

Ash is a regular and will elaborate.

i saw some digging going on for fencing last weekend @ patni field, not sure abt latest status, but still flyable if we go little more inside!!!!!
Hanger: Mini Yak-54| 210 Phantom | SU-47| F-15| EuroFighter|Scrappy|SU 27|Eurofighter|Sukhoi PAK FA
Blade MCX| Blade CP PRO
JR XP7202| DX7