Hello Everyone,

I was planning to upgrade my existing Quadcopter to a Hexacopter. I have shortlisted the Tarot 680 Pro frame for this. I want to see the possibility of using the existing Sunnysky V4006 740KV motors I have with my quad to this new frame. If I can do that then I can save some money and go for just two more motors of the same type! 

I want to know if these motors are compatible with the Tarot 680 Pro frame or not? I plan to use 13 Inch CF props on a 4S LiPo setup.

Copied:-

Configuration Specification:
The diameter of 695MM
Rotor size: 12-13 inch carbon fiber propeller TL2829
Brushless motor: 4S/620KV4006 brushless motor TL68P02
Battery specifications: 14.8V 4000-5000MHA
Brushless ESC: 20-30A

Suggested Setup:
6x 2212 KV980 motor
//www.fpvmodel.com/t-motor-mt2212-kv750-kv980_g306.html
//www.fpvmodel.com/sunnysky-x2212-brushless-motor-kv980_g345.html
3 pairs 10 inch CF propellers(carbon fiber 1038 or 1047)
6x 18-30A ESC

Quote from: ambattuhari on October 06, 2018, 09:16:04 AM
Copied:-

Configuration Specification:
The diameter of 695MM
Rotor size: 12-13 inch carbon fiber propeller TL2829
Brushless motor: 4S/620KV4006 brushless motor TL68P02
Battery specifications: 14.8V 4000-5000MHA
Brushless ESC: 20-30A

Suggested Setup:
6x 2212 KV980 motor
//www.fpvmodel.com/t-motor-mt2212-kv750-kv980_g306.html
//www.fpvmodel.com/sunnysky-x2212-brushless-motor-kv980_g345.html
3 pairs 10 inch CF propellers(carbon fiber 1038 or 1047)
6x 18-30A ESC

Thanks for the suggested setup...but I still did not get an answer to my question!
Can anyone comment?

Sent from my Mi A2 using Tapatalk