hi everyone I am new to this I have tried building a f450 build but got struck with the settings not able to fly the drone
I am having kk 2.1 and fs th9x transmitter with fs ia10b receiver
There are so many videos in youtube. Just refer to any of them.
Tried many but couldn't get to fly my f450 any help would be appreciated
Post your flight video or the props are not moving at all?
I tried to reset and configure my drone again now im facing new issues
No yaw input and no signals received in receiver test(https://uploads.tapatalk-cdn.com/20220106/5e7f0508edf9cbba93dc47b35a6c4496.jpg)(https://uploads.tapatalk-cdn.com/20220106/30af274a6a67bc6e36671e5e3ee69867.jpg)
Sent from my RMX1921 using Tapatalk
May be this one can help ... http://www.rcindia.org/multirotors/kk-2-0-setup-reciever-issues-no-signal-help!/msg183300/#msg183300
hi i have tried the same but of no use i am attaching my quad connection pics please let me know if there is faults in it
:banghead:
I have got few questions
Q1) Was your transmitter powered on when you were doing these test?
Q2) Is your receiver bound with the transmitter?
Q3) Is your receiver getting power and is functioning correctly?
You could connect an ESC to the receiver and see if the motor spins.
Make sure no propeller are on the motor.
Regards,
Mohammed Naveed
Done the test as you said its working i had to reset my transmitter to get it working
Now all my motors are spinning
Sent from my RMX1921 using Tapatalk
Now i have connected it and one more thing i have changed the max of my subtrims but still its showing the below values
can anyone help me to get them right(https://uploads.tapatalk-cdn.com/20220206/80e9fe18c05a9bcfe5df7c2c29571d85.jpg)
Sent from my RMX1921 using Tapatalk