FRIENDS,
i have a kk 5.5 blackboard and it enters into programming mode but wont arm...........on being suggested i got a usb programmer for the same.............can somebody be nice enough to kindly guide me what to do now since i can find any drivers for the usb programmer.
regards
please give me the link of the programmer or any picture of it
if it has a 6 pin header then connect the programmer directly to the board or otherwise you will have to make it a 6pin manually
get the drivers from here: http://www.fischl.de/usbasp/
HI,
this is the link and i got it from these guys only
https://www.robomart.com/usbasp-isp-programmer-firmware-for-kk-5-5-multicopter-control-board?search=RM0958&dsearch=RM0958
thats the right one. just go to device manager on your pc and find the usbasp and install the driver in there
can u help me on team viewer or ammyy admin i have whats appd u
just follow this video: https://www.youtube.com/watch?v=FtqGoaIFiQo
hi,
thanks a ton for the video it was gud .............though for windows 8 i had to deactivate the certificate verification part...............now comes the kk flashing ............mind throwing some light on that.
download lazyzero by typing it on google and open it up
select the programmer,board,type of firmware and click the upload button
downloaded the kk flash tool............ran it it says install java ............installed JRE but still the same thing ............now i have started to enjoy the pain................guide what to do
THIS IS THE ERROR
lazyzero doesnt show this error usually
which version have you downloaded? 32bit or 64 bit?
you need to download 32 bit
i have downloaded the 64 bit win 8 version and now it says with what application you want to open it ..................what shit i have got myself into..................by the way mi laptop is 64 bit win 8
i repeat it, you need to download the32 bit application(it is seen in the background of your picture)
kk flashtool win32
but mi laptop has 64 bit os so maybe i have to download a diff flash tool for the kk
did you try opening this???
see this: https://www.youtube.com/watch?v=__EGcwtlPFs
well the kk tool downloaded has both 32 and 64 ..............the image sent to you is actually showing the 32 slightly ......but actually the error is cuz i dont have java which i am installing and have to do some more moderations for it
i am trying the tool with 64 bit and the error is for that only 32 is just visible as it has 32 bit tool also
friends,
at last the kk 5.5 got flashed like a man possessed ...............no problem and as soon as i did that i got it back to my quad ............armed it and my my the blue light went on ..................................thanks to all specially very very big thanks to darshan who has been patient enough to help ..............thanks darshan if not for you it wouldnt have gone thru.....................
tomorrow i fly hopefully i vud record something it would be mi first flight.....................thanks again to all and my man darshan
:salute: {:)} :bow: :hatsoff:
Don't mention it. I just try to help others on the info I know so...
Waiting for the flight video :thumbsup:
By the way calibrate escs first (the video you sent me) and then adjust pot setting by this method : https://youtu.be/Pj_j0dJMeTs (see description)
friends,
the legendary kk 5.5 blackboard......................
when i arm the system and push the throttle from mini to max the 4 motors start one by one and not together..............example if i keep the throttle to 50% only 2 motors would start ............which flips it over.....................but when i instantly put throttle to max all 4 start..............is this normal or all have to start together.
in the second case that is the right side elevation joystick on my flysky..............when i put it max one motor stops and when i do it mini the adjacent motor stops .............during this time the remaining 3 motors work fully....................
on putting the throttle to max and playing with the elevation joystick i can hear the motors changing speeds........
kindly guide what is to be done
as i had said before, you need to calibrate the ,escs through the kk board. what the calibration does is it adjusts the starting and end points of the escs and makes them equal for all escs so that they start up together
you do this by setting the tx throttle to max and yaw pot to 0%and power it up...the led will blink twice and when you hear the esc beeps bring the throttle down to 0. you will hear another esc beep and now when you increase the throttle, all motors will spin up together.restore the pot to 50% and run the motors now... they should spin up all at once. it is okay if there is a slight difference