FRIENDS,

disappointed with my kk 5.5 blackboard ....i got hold of a avionic hexa quad fc ...........it immediately linked with the flysky 6 ch and looked fine..........................when i tried to fly the thing ..................it wont lift off..................the rotors ran perfectly and even on max throttle the quad didnt lift off .................instead it flipped on the grass....................

got back the quad on the table and took my new hobbywing ESC programmer and connected all the esc one by one .......

brake -off
battery type - li
cut off - soft
cut off voltage -low
start mode - normal
timing- middle
music -nothing
reserved item  - option 1

when i did this for all the 4 i realised that the ESC had diff settings earlier ................just a lill bit here and there...................

now where am i wrong ....................the thing wont lift off the esc are 30 amp mystery, motors are 1000kv, props 10x4.5 frame is 450....lipo is 1100 mah..............what to do ...............tx and rx is flysky 6 ch

weight

prop with metal knob/holder - 12.5 g
flysky rx - 7 g
avionic fc with leads - 16.5 g
lipo - 182 g
brushless motor - 50 g
each leg of the quad - 52 g
esc - 26 g
plus the pcb with soldering and around 10 plastic ties

anyone who can help me lift off...............................

It seems to be the problem with your battery. Please let me know the exact ratings of your battery and additionally also provide model numbers of your esc and motors.

Did you calibrate your escs before connecting them to the fc?

the battery is unbranded grey coloured 1600 ( just asked the seller)
esc is -mystery CLOUD-30A , BEC -2A/5V VER 2.1 DC5.6V-16.8V 30A
no after i programmed the esc i dint try flying

just weighed my quad with all and sundry the total weight is 850 gms.................any help

Is the Lipo at least a 3S one and 20C or more? 1100 mAH won't make your flight long with 850 gms but it should at least lift off if the supplied current is sufficient.

But if it flips then it could be a different issue like wrongly placed props or the ESCs are connected to the wrong connectors etc.

Try increasing gains........

First doubt is the battery for sure.

But still , as you say there is tendency for flipping , check you have correctly installed props according to motor lay out.
Also check motor rotations and ESC to flight controller connections.

friends,

i have put the motors to 1 and 3 clockwise and 2 and 4 anticlockwise..............all propellers push air downwards.............10x4.5 written side is on top of all 4 props........................any change i need in this setup.

the battery ordered is this one

http://rcmumbai.com/index.php/product/gens-ace-2200mah-11-1v-30c/

No lift and flipping is generally due to wrong props orientation or wrong order of motors connected on outputs, please remember every FC has a different motor numbering scheme make sure you are following  motor numbering scheme of your new FC not the old one.