Looking for beginner setup

Started by adyonfire4, June 22, 2011, 01:32:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mukundh mahesh


Rajat kumar goswami

Sir ,I am completely new to rc hobby.Could u plzz elaborate on the local materials that I can get to build a simple rc model.

Rajat kumar goswami

Can anyone help me out with the most basic rc info??I need to learn about the types of planes that can be made, the required equipments,and their working depending upon their position in the model.

anwar

Hangar : Please see my introduction.
RC India forum and me : About this forum.

Ricky

Requesting your help guys to start this hobby. Where do i go and pick up the Plane, the controller and what are the recommendations.

manojswizera

welcome ricky,

All you have to do is, start some reading here, and will get everything clear.

http://www.rcindia.org/rc-india-forum/the-rc-india-gems/

http://www.rcindia.org/beginners-zone/what-is-the-best-way-to-get-into-rc-in-india-on-a-budget/

start with skysurfer witch comes with all the electronics and radio. available at rc bharat and rcbazar.

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.

Ricky

Guys - Which plane should i buy for the beginners level and from where. I am based out of Gurgaon. Please suggest...!

anwar

Ricky -

Welcome to RC India :)

Please do not post in other threads about your question.  I have moved it to this thread, which already discusses your question.

First of all, please see our general advise to newcomers here about buying stuff and getting into RC.

http://www.rcindia.org/rc-outlets-and-resellers/anything-and-everything-hobby-king/msg68517/#msg68517
http://www.rcindia.org/wanted/multirotor/msg135804/#msg135804

You have to spend time searching and reading, otherwise you will lose money.  And people will be reluctant about answering this question which has been asked, discussed and answered many times before !
Hangar : Please see my introduction.
RC India forum and me : About this forum.


manojswizera

Ricky, you havent read my above post. its already stated SKYSURFER (beginner plane ) and from Rcbaazar or RcBharat.  :)
Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.

sanjayrai55

Ricky ; if you are in Gurgaon contact Girish (girishsarwal) or me through this forum. We fly at Sector 29 Leisure Valley regularly

roshan.dixit

BUT SIR OUR CITY BHUBANESWAR (ORISSA) DOSN`T HAVE A HOBBY SHOP STILL NOW  :banghead: :help:

K K Iyer

@roshan.dixit
Search under members. There are many from Bhubaneshwar. A few are active. Try contacting them by sending a personal msg through this forum. They may help.
But why do you need a local shop? So many on the net!
(Using all capitals is considered equivalent to shouting)

rbelango

Hi All,
This is my first post!!! Im new to aeromodelling and interested in electric models after reading many threads in this site. i saw that Mr. Moss was the name taken by many people but the posts are as old as 2009. can you suggest me the best suited model with a budget of 10k +/- 2k. Also where can i buy them. im from Bangalore.

Nithinraj Kotian

Go for skysurfer glider plane  and RCB6i Radio. Both will come under in your budget. And its available in Rcbazaar.com Bengaluru.
Life is Simple Don't Make it Complicated

madaquif

RCDHAMAKA.COM or RCBAZAAR.COM Both are in banglore... ;D

you can go for easystar, skysufer (pusher propeller style) or any higwinger trainer model.

http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_46&products_id=906
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_46&products_id=659

but I would suggest to buy a TX first...practice on simulator :)

Regards

MadAquif...

4 D RC ....SURFACE WATER AIR N SPACE

madaquif

Regards

MadAquif...

4 D RC ....SURFACE WATER AIR N SPACE

rbelango

Thank you all for your prompt reply. What type of simulator should i get and is it available in RCbazaar or rcdhamaka? Cost? Also suggest the spare parts that i should keep ready 8-)

utkarshg13

Hello,
Mr. Moss is a very good beginner plane. I had build one and organised a workshop on it too. Almost everyone was a beginner in that and they made the model successfully and flew it too. You can see it is in yellow in the pic. The kit for this is easily available at muav.in
If you want to go with other models like easy star, skysurfer you could go ahead with them. Very good glider models. The RCB6i radio is a good one with numerous features. Now, you'll have to decide which model you want. Also, a small suggestion kindly invest for a simulator too for learning some basic flying.
You could visit:
rcdhamaka.com
rcbazaar.com
muav.in
:hatsoff:
"If you were born with wings, do every thing you could, for flying."

baljitsingh

call me this no. 8427110077, 9815069797 i ll help u

tarang nagar

hi i am very new and i am in vishakapatnam is RCindia.com an all over india website ????

i am trying to build a basic foam model with a 20AMP brushless motor and i need to find the stuff
pls tell me soon

K K Iyer

#121


Search. You will find.

Orange

Hello
I am Prashanth From Kasaragod, kerala state india

i am  beginner in flying rc coptor want to learn fly quad copter
expecting guidlines from experts


AL HAM SHARI

 :help:Bro I am from kerala Im 13 I Love RC planes but we don't have much money .Can anyone help me finding a rtf plane with all parts , Lipo, Tx and Rx under 4800  :Rs:   ???
A Dozen Scratch Built Models , 
VT-Speedster Pro
55' UAV Wing
Model  Rocketry

topalle

If you have such a limited budget then its difficult...
minimum 7 k is required to enter this hobby...
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator