Thanks guys.. Bought it.

worth it... grab the deal..

@atty,
When you have a dedicated thread for this subject, please refrain posting duplicates in other threads.
You have posted it in three other threads too.

Hi kk,

Will keep that in mind next time. I was in bit hurry that's why I did that.

Post pictures of charger nd lipo

Can u tell me the shop where rc stuff I get... In lajpat market.

I bought these from Legend Electronics, shop no: 594, Old Lajpat Rai Market, near to chandni chowk. (Dont get confused with Lajpat market ) There number: 9810648330 and 8375927680.

The shop next to it, Shop no: 595 also deals in this. He told me that if someone cant come, they can also ship these products.

Here are the details of what I got today:

Motor: Mystery A2212-6 2200KV Brushless Outrunner Motor (http://rcbharat.com/brushless-motors/182-mystery-a2212-6-2200kv-brushless-outrunner-motor.html)
ESC: Hobbypower 30a Brushless Speed Controller ESC (http://www.amazon.com/Hobbypower-Brushless-Controller-Multicopter-Helicopter/dp/B00DU49VL2)
Cost: Motor + ESC = 1100

Servo: Tower Pro SG90 Mini 9g Gear Micro Servo Motor (http://www.ebay.in/itm/like/331420590894)
Cost: I got 3 for 600, makes 200/peice

Tx & Rx: FlySky FS-CT6B 2.4G 6CH Radio System (http://rcbazaar.com/products/396-fs-ct6b-6ch-24ghz-transmitter-receiver.aspx)
Cost: 2400

Charger: Imax RC B3 Compact (http://www.imaxrc.com/B3-Compact.html  ,  http://rcmumbai.com/index.php/product/imax-rc-b3-compact )
Cost: 550

Lipo: ThunderBolt 2200 MaH 3s 25c (Cant find online)
Cost: 1100

Propellers: FC 9*4.5
Cost: 150 for a pair

Hope this helps!

Shop Details:

Shop No: 594, Old Lajpat Nagar Market, Near Chandni Chowk, Delhi.
Contact Info: 9810648330 and 8375927680.


If you call, ask them for mannu bhai. Tell them that you got his number from one of my colleague who has bought items from you and ask for further discount. 


Cheer!!

i think the suggested propellor is 6*4

I link has a different motor. In the link, it is A2212-6 2200KV Brushless Outrunner Motor, what i have is A2212 2200KV Brushless Outrunner Motor.

Still, point is what should be the right Propeller?

my dear mystery has only one 2200 kv motor.... u need to get gws pro.... u can find it in rc dhamakka.... or rc mumbai.... the shaft is 3.17mmm try to get a prop saver.... and what model u r going to make?

u need to change the prop.... definitely because i use the same motor.... for reference check edallhobby and economical motors in it

Atty, it is poor etiquette to hijack someone else's thread by posting your own needs on it, especially since you had already posted another thread on the same

I was about to say the same. The user is hereby warned not to post the same discussion in multiple threads, let alone someone else's thread.

Hi Sanjay and Anwar,

I know I did wrong by posting same things on 2 threads. I did not hijacked anyone's thread, just started 2. Will keep that in mind next time.

Thanks again Anwar for merging both as I was looking to delete the other but didnt find the option.

I don't want to pick hairs, but do not like being misquoted.

a) You posted on a thread started by Adel. And, posted extensively. It was the matter which you posted which was transferred to this thread. Therefore "I did not hijacked anyone's thread, just started 2" is wrong

b) My remark was originally posted in that same thread started by Adel. It got transferred here along with the rest

Anyway, I guess the meaning of the message is adequately clear.

Let me take this opportunity to wish you the very best during your build and flying, and if you need any help just shout

Sanjay and Anwar instead of Sanjay sir and Anwar sir.
Wow

Quote from: rcrcnitesh on January 01, 2015, 07:01:00 PM
Sanjay and Anwar instead of Sanjay sir and Anwar sir.
Wow

+1 nitesh,
What has happened to courtesy in this country? Forgotten?
Why should a newcomer to a club/forum not address others as Sir?
Till he gets to know them personally.
You may have noticed that i address everyone as Sir, except those who are personal friends, or those who i know are younger than my children.

Quote from: Atty on January 01, 2015, 05:34:24 PM
Hi Sanjay and Anwar,

I know I did wrong by posting same things on 2 threads. I did not hijacked anyone's thread, just started 2. Will keep that in mind next time.

Thanks again Anwar for merging both as I was looking to delete the other but didnt find the option.

Here is the message i posted yesterday.
@atty,
When you have a dedicated thread for this subject, please refrain posting duplicates in other threads.
You have posted it in three other threads too.

Yes KK Sir even I feel that one must address others as Sir till they know each other. This is a culture started by MNCs, but even there we address people in such way whom we know personally.  A hobby is not just making things and getting involved into the stuff, but also to respect the work we are doing, and respecting others who are into the same field.

Sorry Guys/Sir if you have been hurt.

The place where I work, work culture is very different than here. I have to even call my CEO by his name. There is no sir or mam as they think all are same and we can always learn from each other, regardless of the age.

Still, will keep that in mind too from next time I post or reply.

Just for my knowledge, Can anyone tell me where should I post my question if I want a quick reply.

Last time I posted on other threads because I needed an answer quickly. No body was replying on this tread and to my curiosity, I just posted the same in Other thread ( by looking at Recent Updated Topic) where I saw more people were online and posting at the same time. 

Usually lots of viewers but very few replies.
Topic heading should be specific to catch someone's attention.
Headings like 'New to RC', 'Need help' etc are too general, and usually indicate that the author has not bothered to search through the available material.
Such queries are so frequent now that the experienced members have stopped responding.

Something like 'All electronics including Tx for Rs 5900' perhaps...

Good to know you got your stuff. Posting pics of the shops was a good idea!

Thanks KK Sir for suggestion.

Between I am working on the wings of the plane. I have some idea for the structure, guys help me how can i make it more better.

Attaching the plan I made and the one picture of the cut out piece. It has only the rectangles for now, will be cutting the triangles soon.

you need to sand it using a sandpaper.