Hi Guys :)
I am new to RC Hobby and have spent a decent time on researching and learning from internet. I am looking for someone who is from Delhi (I stay near Malviya Nagar) to help me out to get some hands-on experience in making and buying the stuff required for RC plane.
I have looked to few of the LHS in Delhi but cant find a budget ATF or RTF planes. Help me with suggestions on what and from where should I buy the starter components..
Thanks & Regards
Atty
Hi,
Welcome to this wonderful hobby & to RCIndia forum.
Look up HelliFlyer on this forum buddy, he should be able to get you started. He generally has everything to get you up and flying. He doesn't has a store, but he maintains his stock from home only (well atleast till sometime back).
Hi Atty,
Welcome to our RC lover community, as you said above, i am not from Delhi :), me from bangalore, though will try to help you out a bit.
as your new, 1st a fall you need to decide from where you have to start, i mean to say a multi rotor or a plane,Can you be specific that are you interested in making the stuff or simply buy and fly?
If your a maker, then my suggestion would be to start with a quad copter, as it will surely fly in your 1st attempt and will give you further confidence and it is bit easy to make also, you need to simply fit the components, for multicopters to order in Indian website, the best and cheapest you can find on quadkopters.com, they are very good in there business.
rest if you provide more details about your plan, we can further help you out.
Thanks Dheeraj, will look for "HelliFlyer" and try to get the components from him.
Oh, i did some research, he based in Delhi. And seems like he is more in heli's and quad. Anyways I found a website on his profile http://delhi-rclub.webs.com/apps/links/ (http://delhi-rclub.webs.com/apps/links/) . This is a Delhi based club which will be of great help to me.
Thanks again.
Hi Kullshaan,
Thanks for welcoming.
I am more of a maker and more inclined to planes than copters. What I am looking forward is to make a sort of glider plane which is slow and stable.
I was looking to the two babys which you have made. They are just awesome and would like to create something like that. Can you help me with the layout and the electronics which you have used to make it fly?
Hi Gyus,
To start with the plane, I thought to buy first biofoam for the structure. Done some research and found one shop near by, Sitaram Stationers in south ex. Going to buy 1-2 sheet and let you guys know the rates. On phone they told me 5mm @ 300 and 10mm @ 400, will try to bargain.
Did some research on layouts. found this link useful: http://www.instructables.com/id/Foam-RC-Airplane/ (http://www.instructables.com/id/Foam-RC-Airplane/)
I got one biofoam sheet. Its 24 * 36 inch, thickness is 5 mm.
Guys help me out to select the layout. :help: :help: :help: :help:
hi atty
since u r new so upto me using bio foam is not a great idea
Actually u can by goods at a cheaper rate in www.rcsportz.com/ (//http://) (//http://) (//http://) (//http://) (//http://) (//http://)
or else in rcmumbai.com/
or else in Rc bazaar.... all these shops are good.... so straight away u cannot fly an 4 channel airplane and u need some muscle memory to come..
since u want to make a model u can start with a slope ... the link is given below for the plan
http://www.stevelange.net/spad/ (http://www.stevelange.net/spad/)
So better buy a simulator and make this model... this will let u out of fear... since its easy to make and gentle to fly... the budget also less... dont include the alierons... use a rudder surface and make two wing tips with some 45 degress which will give u some more stability...
u Can use aluminium rod for fuselage and try to use cf2822 because u can use aluheat shrink which with fits to the aluminium perfectly
Others please u can comment on it...
Devanesan Andrews
Guys I am at lajpat rai market and here I am getting all the electronic component at 5900.
It includes:
2212 1000 kV motor clubbed with 30A ESC@ 1100
Skyfly Tx Rx ch6b @ 2400
3 servo @ 600
2 props @ 150
Lipo 2200 man 11.1 v @ 1100
Lipo charger @ 550
Sugguest if it is a good buy..
Guys I am at lajpat rai market and here I am getting all the electronic component at 5900.
It includes:
2212 1000 kV motor clubbed with 30A ESC@ 1100
Skyfly Tx Rx ch6b @ 2400
3 servo @ 600
2 props @ 150
Lipo 2200 man 11.1 v @ 1100
Lipo charger @ 550
Sugguest if it is a good buy..
company of the motor ... esc and what servos?
rcb 6i is a worthy transmitter but u can spend some more on transmitters at the begining itself....
It's a good price.
Ok. Then I should not buy the transmitter for now... Should I buy the other stuffs?
tell me whats ur budget
Lipo is of thunderbolt. Will go back to the shop and let you know the brand of motor... It was something starting from "M" and servo he said for 2 kg of thrust. Dont remember the brand.
I am looking arround 5000. But I guess it wont come that cheap
is that only for transmitter or else the whole
For the whole ;-) I know its very less but I dont want to spend much as a starter.
Motor is of Mistri.. And servo is of tower pro.
Motor and ESC is of also of MYSTERY brand. Servo is of tower pro..
Are they Ok to go.. Or should I leave it.
This is the motor:
http://www.goodluckbuy.com/mystery-a2212-13-1000kv-outrunner-brushless-motor-for-rc-helicopter.html (http://www.goodluckbuy.com/mystery-a2212-13-1000kv-outrunner-brushless-motor-for-rc-helicopter.html)
I am buying this setup for start. Wish me luck.
Best of luck go with it.
good price.. grab the deal..
Thanks guys.. Bought it. :)
worth it... grab the deal..
@atty,
When you have a dedicated thread for this subject, please refrain posting duplicates in other threads.
You have posted it in three other threads too.
Hi kk,
Will keep that in mind next time. I was in bit hurry that's why I did that.
Post pictures of charger nd lipo
Can u tell me the shop where rc stuff I get... In lajpat market.
I bought these from Legend Electronics, shop no: 594, Old Lajpat Rai Market, near to chandni chowk. (Dont get confused with Lajpat market ;) ) There number: 9810648330 and 8375927680.
The shop next to it, Shop no: 595 also deals in this. He told me that if someone cant come, they can also ship these products.
Here are the details of what I got today:
Motor: Mystery A2212-6 2200KV Brushless Outrunner Motor (http://rcbharat.com/brushless-motors/182-mystery-a2212-6-2200kv-brushless-outrunner-motor.html (http://rcbharat.com/brushless-motors/182-mystery-a2212-6-2200kv-brushless-outrunner-motor.html))
ESC: Hobbypower 30a Brushless Speed Controller ESC (http://www.amazon.com/Hobbypower-Brushless-Controller-Multicopter-Helicopter/dp/B00DU49VL2 (http://www.amazon.com/Hobbypower-Brushless-Controller-Multicopter-Helicopter/dp/B00DU49VL2))
Cost: Motor + ESC = 1100
Servo: Tower Pro SG90 Mini 9g Gear Micro Servo Motor (http://www.ebay.in/itm/like/331420590894 (http://www.ebay.in/itm/like/331420590894))
Cost: I got 3 for 600, makes 200/peice
Tx & Rx: FlySky FS-CT6B 2.4G 6CH Radio System (http://rcbazaar.com/products/396-fs-ct6b-6ch-24ghz-transmitter-receiver.aspx (http://rcbazaar.com/products/396-fs-ct6b-6ch-24ghz-transmitter-receiver.aspx))
Cost: 2400
Charger: Imax RC B3 Compact (http://www.imaxrc.com/B3-Compact.html (http://www.imaxrc.com/B3-Compact.html) , http://rcmumbai.com/index.php/product/imax-rc-b3-compact (http://rcmumbai.com/index.php/product/imax-rc-b3-compact) )
Cost: 550
Lipo: ThunderBolt 2200 MaH 3s 25c (Cant find online)
Cost: 1100
Propellers: FC 9*4.5
Cost: 150 for a pair
Hope this helps!
Shop Details:
Shop No: 594, Old Lajpat Nagar Market, Near Chandni Chowk, Delhi.
Contact Info: 9810648330 and 8375927680.
If you call, ask them for mannu bhai. Tell them that you got his number from one of my colleague who has bought items from you and ask for further discount.
Cheer!!
i think the suggested propellor is 6*4
I link has a different motor. In the link, it is A2212-6 2200KV Brushless Outrunner Motor, what i have is A2212 2200KV Brushless Outrunner Motor.
Still, point is what should be the right Propeller?
my dear mystery has only one 2200 kv motor.... u need to get gws pro.... u can find it in rc dhamakka.... or rc mumbai.... the shaft is 3.17mmm try to get a prop saver.... and what model u r going to make?
u need to change the prop.... definitely because i use the same motor.... for reference check edallhobby and economical motors in it
Atty, it is poor etiquette to hijack someone else's thread by posting your own needs on it, especially since you had already posted another thread on the same
I was about to say the same. The user is hereby warned not to post the same discussion in multiple threads, let alone someone else's thread.
Hi Sanjay and Anwar,
I know I did wrong by posting same things on 2 threads. I did not hijacked anyone's thread, just started 2. Will keep that in mind next time.
Thanks again Anwar for merging both as I was looking to delete the other but didnt find the option.
I don't want to pick hairs, but do not like being misquoted.
a) You posted on a thread started by Adel. And, posted extensively. It was the matter which you posted which was transferred to this thread. Therefore "I did not hijacked anyone's thread, just started 2" is wrong
b) My remark was originally posted in that same thread started by Adel. It got transferred here along with the rest
Anyway, I guess the meaning of the message is adequately clear.
Let me take this opportunity to wish you the very best during your build and flying, and if you need any help just shout
Sanjay and Anwar instead of Sanjay sir and Anwar sir.
Wow
Quote from: rcrcnitesh on January 01, 2015, 07:01:00 PM
Sanjay and Anwar instead of Sanjay sir and Anwar sir.
Wow
+1 nitesh,
What has happened to courtesy in this country? Forgotten?
Why should a newcomer to a club/forum not address others as Sir?
Till he gets to know them personally.
You may have noticed that i address everyone as Sir, except those who are personal friends, or those who i know are younger than my children.
Quote from: Atty on January 01, 2015, 05:34:24 PM
Hi Sanjay and Anwar,
I know I did wrong by posting same things on 2 threads. I did not hijacked anyone's thread, just started 2. Will keep that in mind next time.
Thanks again Anwar for merging both as I was looking to delete the other but didnt find the option.
Here is the message i posted yesterday.
@atty,
When you have a dedicated thread for this subject, please refrain posting duplicates in other threads.
You have posted it in
three other threads too.
Yes KK Sir even I feel that one must address others as Sir till they know each other. This is a culture started by MNCs, but even there we address people in such way whom we know personally. A hobby is not just making things and getting involved into the stuff, but also to respect the work we are doing, and respecting others who are into the same field.
Sorry Guys/Sir if you have been hurt.
The place where I work, work culture is very different than here. I have to even call my CEO by his name. There is no sir or mam as they think all are same and we can always learn from each other, regardless of the age.
Still, will keep that in mind too from next time I post or reply.
Just for my knowledge, Can anyone tell me where should I post my question if I want a quick reply.
Last time I posted on other threads because I needed an answer quickly. No body was replying on this tread and to my curiosity, I just posted the same in Other thread ( by looking at Recent Updated Topic) where I saw more people were online and posting at the same time.
Usually lots of viewers but very few replies.
Topic heading should be specific to catch someone's attention.
Headings like 'New to RC', 'Need help' etc are too general, and usually indicate that the author has not bothered to search through the available material.
Such queries are so frequent now that the experienced members have stopped responding.
Something like 'All electronics including Tx for Rs 5900' perhaps...
Good to know you got your stuff. Posting pics of the shops was a good idea!
Thanks KK Sir for suggestion.
Between I am working on the wings of the plane. I have some idea for the structure, guys help me how can i make it more better.
Attaching the plan I made and the one picture of the cut out piece. It has only the rectangles for now, will be cutting the triangles soon.
you need to sand it using a sandpaper.
So should I cut the triangles first or directly glue and sand them. My main concern is regarding the wings curvature.. Will it be able to create the low pressure high pressure zone as of an real plane wing.
You can directly approach KK Sir for any query related to planes. He is one of the most Senior members in this domain. One can get a lot from him.
I am moving ahead to tails. Have made a plan. Attaching the side and top view of the tail I thought of. Suggest if you have any other thoughts on this.