Need help for fpv quad setup

Started by Tanmay.mathur, November 03, 2014, 03:21:07 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Tanmay.mathur

http://www.dx.com/p/20mw-5-8ghz-wireless-av-transmitter-module-5-8ghz-video-av-receiver-set-for-fpv-system-256271 hi  this link is for my fpv solutiƶn i have a few quiries 1 wil a WL TOYS V929 can lift it with a camera of 5 grams . And how to make antenna for it thanks tanmay rgds
Regards,
Tanmay mathur

Tanmay.mathur

Regards,
Tanmay mathur

Tanmay.mathur

Regards,
Tanmay mathur

Tanmay.mathur

Regards,
Tanmay mathur

SideWinder

Tanmay, you are probably going to have LOTs of difficulties in making this project. Most of the things are documented in your source of inspiration like the questions you asked. And if this is your first quad, then I would say try the simpler things first, get a hang of it, then take on challenges like this.

Anyhow,

The first link you posted is just the module(TX5813) for 10mW 5.8ghz vtx/vrx(DX states 20mW ??) and second link is for a complete vtx/vrx @200mW  and if you strip all the components, you will find similar module in there (TX5823).

Vrx modules should be same in both the cases I think. So its upon you whether you would like to get the modules or strip them off from complete sets. How to wire that module, you can find it here

http://imgur.com/2Uqe0Qw

And the antenna you asked, check out IBCrazy Cloverleaf Antenna build thread,
http://www.rcgroups.com/forums/showthread.php?t=1388264

And as for the camera, I dont think it would be locally available, either you can use a stripped down keychain cam as shown in the pic above or go for http://www.foxtechfpv.com/fh18c-520tvl-wide-voltage-mini-camera-pal-p-900.html which weighs 8gms!

So best of luck  :)

sooraj.palakkad

5.8GHz 200mW Tx+Rx mmodule combo is available from Ebay for 20$ !!!

RC Hobbyist and an Aerial Cinematographer..

Tanmay.mathur

Thanks sidewinder for your valuble suggetions and i have my own camera  the one in the cctv cam . I just want to know the link to the ebay vtx rx set of 20$. Thanks sooraj also
Regards,
Tanmay mathur

Tanmay.mathur

Oh the camera shown in the website is the same as mine in the cctv's aluminium box
Regards,
Tanmay mathur

v2 eagle

those are just bare modules and they are going to need a lot of other circuitry like power module and antenna coupling module for effective functioning. the result might vary , a properly setup one can give you more than a KM as claimed or it can cut you short by lot. it all depends on additional circuitry. for a little more dollar, you can get a complete setup of TX, RX and the camera.

Ashok.P
FPV with head goggles

http://ashokpkumar.wix.com/mysite

sooraj.palakkad

Here you go :

http://www.ebay.com/itm/111502538383?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Remember this is only the Tx and Rx module, you have to add matching antennae , Heat sinks , cables.
Best of luck.
RC Hobbyist and an Aerial Cinematographer..

SideWinder

The circuity is not as hard as it looks. But its all about weight.
Tanmay can you put up a pic of your camera?


Tanmay.mathur

Sorry i cant find it at present but soon i will. Well its a  common small 1/3 ccd sony camera.
Regards,
Tanmay mathur

sooraj.palakkad

RC Hobbyist and an Aerial Cinematographer..

Tanmay.mathur

Regards,
Tanmay mathur

sooraj.palakkad

Why should you go fora FPV goggle, When you are starting just get 4.3 to 7 " LCD screen , and  upgrade to FPV goggles if you plan to stick to FPV flying.
You can also buy Portable DVD players or just use your Laptop as a monitor, in that way you can avoid spending more bucks and also free up some space in your backpack !!

If you really plan to get goggles get good ones, as cheap goggles may harm your eyes.
RC Hobbyist and an Aerial Cinematographer..

Tanmay.mathur

Thanks sooraj i am not planning to buy the goggles i was just sharing them with all
Regards,
Tanmay mathur

rohan123

i dont know about this aliexpress ,your order may not reach you ,you just cant trust sites these days.
and you dont need fpv goggles right now ,you just want a camera ,receiver and transmitter and some accessories .
which quad will you be using?
regards
rohan

sooraj.palakkad

RC Hobbyist and an Aerial Cinematographer..

rohan123

ok i didnt know that ,but still tanmay dont need goggles yet.

sooraj.palakkad

that's the point.
P.S the listed goggles seems worth the price though !
RC Hobbyist and an Aerial Cinematographer..

Tanmay.mathur

I am planning to buy wl toys v929 quad  for 3500 rs amazon by ibhejo
Regards,
Tanmay mathur