hi to all member

i m facing the problem with my Futaba 6exap. when i connect the sim cable to PC the indicator on Cable dongle start blinking and then i connect the transmetter.

i m not able to calibrate the controls

i m using   aerofly professional Deleux

help me

Is the sim detected by aerofly at all ?  Or is the problem only with calibration ?

Make sure you have chosen a model with PPM as the transmission type.

anwarbhai

i just connected the usb dongle, my computer shows the PPM game controller but the aerofly dosnt show the transmetter

what should i do?

If your model is set to PPM in the radio, I am out of ideas

Please seek local help. I assume you have ruled out simple issues like loose contacts in the plugs/pins etc by jiggling them.

have u solved this?

i connected the dongle through the four port USB hub, for some reason on the mother PC it ain't working, through the hub? works like a charm, Futaba, Hk  Hirobo all of'em

wingco sir,should I change any mode or simply connect and calibrate?

PPM, works good for me

My problem has been solved by Vishvesh  ..I was not plugged in the square plug fully in the tx.. 

Quote from: anwar on January 30, 2010, 10:05:45 PM
I assume you have ruled out simple issues like loose contacts in the plugs/pins etc by jiggling them.

So this was the issue !

 

@xxkrishxx: i spell my name " VISHVESH" .... why do people pronounce it wrong or write it wrong....?