Main Menu

Need helpera

Started by aman pradeep, May 18, 2018, 09:39:41 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

aman pradeep

Hai,.   I have just entered in to the rc world. But i wanted to build a DIY plane .i build 3 of them but non of them flyed. My house is near vytila,kochi. Please help me if any plane flyers near me .    Please contact me on 8289895832

AL HAM SHARI

Bro, you told that you built 3 planes.Did you scratch built the planes or built using plans? We can help you.
A Dozen Scratch Built Models , 
VT-Speedster Pro
55' UAV Wing
Model  Rocketry

aman pradeep

I have build a ft mini scout . But the battery i used was 1000mah. It didnt fly.  Next i scratch build a pusher trainervit also didnt fly . Now i build a plane something like a ft tiny trainer. It dosent even glide.. my electronics are 1000mah baterry,2204 2200kv motor,flysky fsi6 ,and 9gram servos

aman pradeep

Does any one near me can help me with my first flight. It would be grate if you have a well balanced trainer plane

prabal276

Hello there, welcome to the forum.
Why don't you exactly follow the plans? The plane is bound to fly. Balance every plane under the CG before flying. Don't jump into designing your own planes until you either have some experience with R/C planes or you have an education in aeronautics. Even if you have that education, RC planes behave a lot different than real ones. A real Cessna may be a trainer but a RC Cessna is an sport aircraft mostly.
Go for the FT old fogey.
Your motor seems to have a high kv! Any reason for choosing that motor? You will need a motor with lesser KV. What you have is suited more for multi-rotors. Get an Emax "red" motor (1200kv) available on Rchyper.com .
Do you have an simulator? Get one of those 22-in-1 simulators. They work with the fs-i6 and are a great way to learn flying. After you have mastered the sim, you can directly jump to a simple four channel plane instead of a slowish 3 channel one.
However, it's recommended that you do build a 3 channel plane. ( Old Fogey or the FT simple cub -> both are great first timers)
Regards

aman pradeep

Thanks. Ivwill tryold foggy . I had aldredy build a f22 raptor is it good as a  trainer?



aman pradeep

Hai how abut using a low picth prop like 6030. Or 5030 .cause my buget does not aloow me to buy new motor
Can ibuse a 1000 mah 3s on old fogey. 

prabal276

Please watch the FT beginner series.
A Jet isn't the best way to start out. I have been flying 4 years. still haven't moved onto jets.
No, that prop ain't sufficient. The motor wont do.

aman pradeep

The manufacturer recommended prop for 2204 2300kv racerstar motor is 6030 prop.   So does anything weard happens if i put a 6045 prop on it

AL HAM SHARI

You shouldve bought a lower kv motor, and 6x3 prop is fine, @prabal, 6030 prop is fine, google the thrust test of this motor on 3s. @amanpradeep Could you tell your esc ampere? And , it seems that the main reason your plane didnt fly was the CG problem.
A Dozen Scratch Built Models , 
VT-Speedster Pro
55' UAV Wing
Model  Rocketry

AL HAM SHARI

Your motor produced about 200gm thrust half throttle and 530 gm full throttle. So you need to build a small plane that weighs low. So that, at half throttle, your plane need to be flying level. A plane that weighs below 700 gms. Its that simple.
A Dozen Scratch Built Models , 
VT-Speedster Pro
55' UAV Wing
Model  Rocketry