Wanted nylon m3 standoffs .

threeonethree · July 15, 2018, 01:08:48 AM

I have to mount my fc over my ESC but the FC didn't come with m3 nylon standoffs. I don't want to buy a pack worth 300 to 400 for 4 nuts and wait a week for delivery. What do I do

threeonethree · July 16, 2018, 10:40:12 AM

up

miginstruments · July 16, 2018, 03:49:55 PM

Hi, I can send you some but you have to bear the shipping charges, although I ll not charge for the Spacers.

threeonethree · July 16, 2018, 08:36:05 PM

Still unsolved. I do not want to order a pack of 50.

i want the nylon ones like the ones that come with this esc

https://www.banggood.com/Anniversary-Special-Edition-Racerstar-REV35-35A-BLheli_S-3-6S-4-In-1-ESC-Built-in-Current-Sensor-p-1180734.html?gmcCountry=IN&currency=INR&createTmp=1&utm_source=googleshopping&utm_medium=cpc_ods&utm_content=heath&utm_campaign=pla-ods-in&gclid=EAIaIQobChMIyaWHu_Kj3AIVx4RwCh3Elgf3EAQYASABEgIwqvD_BwE&cur_warehouse=CN

saikat · July 16, 2018, 08:50:28 PM

Take a empty ball point refill and make some

threeonethree · July 16, 2018, 09:12:54 PM

i do not know how to make it using that.

I need the standoffs.

K K Iyer · July 16, 2018, 09:45:36 PM

See saikat sir's suggestion and use a blade to cut slices.
Do you really need a Chinese productfor this?
What is this? A highly technical product?
Stand offs? Eh? Is it what is known in India as washers?

threeonethree · July 16, 2018, 10:52:14 PM

And how does the slices screw into the other standoffs I am stacking ?

If you could point me the same product online on any Indian website that would be great

K K Iyer · July 17, 2018, 10:28:37 PM

Perhaps you need some space between the FCB and the base plate for the ESC.

If so, you can use 1" bolts with ~3/4" spacers cut from ball point refills, as suggested by saikat sir, and forget about your existing standoffs that are too short...

threeonethree · July 19, 2018, 08:16:19 AM

And then how do i stack my FC over that? I have a 4 in 1 esc.

something like this. https://f4k3url/images/NB59Bc

I need space between the baseplate and ESC AND space between ESC and FC.

And screws to make it all solid.

So you suggest long screws from base of bottom plate + Plastic spacers to seperate the ESC from Base plate. Then the existing M3 standoffs I have go into the screws to separate the ESC from the FC? How do i forget about the existing standoffs?

threeonethree · July 19, 2018, 11:12:09 AM

this is what i am looking for

https://f4k3url/images/vaym89

ambattuhari · August 01, 2018, 07:44:24 PM

http://hobbyxyz.com/index.php?route=product/category&path=66_89