Hi All,

I am a beginner to this hobby (0 flying experience), and thinking of building the FT flyer.
Will a 935 kv motor, 10x4.5 prop and 850 mah 3s be ok for that ? (I guess this is FT power pack B).

Also planning to use 5 mm unlaminated depron, will tape the depron where cavities, bevels and score cuts have to me made.

Any help will be appreciated.

Thanks in advance !

Which is this Motor? Could you maybe give a link to it?
Kv alone isn't sufficient to determine it's suitability.
I used 5mm depron so that will be fine.
The battery is fine too. (Maybe get a 1000 mah, it will be a little future-proof)
Regards,
Prabal

EMAX MT2213 935KV Brushless DC Motor - Red Cap (CCW Motor Rotation) With Prop1045 Combo (Original)*

https://robu.in/product/emax-mt2213-935kv-bldc-motor-ccw-prop1045-combo-original/?pid=29090