Print Page - shaft and the propeller

Title: shaft and the propeller
Post by: balasubrahmanyam on October 30, 2010, 11:02:31 AM

my motor has a 12mm shaft outside the motor to fix it to the propeller..

it is a outrunner motor now how can i fix the proprller to the motor... it has a small shaft outsides...
should i change the shaft????

Title: Re: shaft and the propeller
Post by: anwar on October 30, 2010, 11:49:42 AM

Have you seen threads like this :

http://www.rcindia.org/electric-power/fitting-prop-on-motor/

Please do some searches with key words like "prop adapter" and "prop saver", and you will see various methods.

Title: Re: shaft and the propeller
Post by: balasubrahmanyam on October 30, 2010, 05:39:08 PM

thanku sir..

Title: Re: shaft and the propeller
Post by: controlflyer on October 30, 2010, 07:15:59 PM

Are you sure its a12mm shaft?
The equivalent is 1.2cms Diameter!

Title: Re: shaft and the propeller
Post by: balasubrahmanyam on October 30, 2010, 07:48:50 PM

its a heli motor
body dia 28mm
shaft dia 3.15mm

RC India

General Topics => Beginners Zone => Topic started by: balasubrahmanyam on October 30, 2010, 11:02:31 AM