Motor :1200 KV Avionic outrunner
ESC :Avionic 20 Amp
Lipo: Turnigy 500 Mah 2S
Servos : 3.7 gm *2
TxRx : Turnigy 5 ch
AUW :225 gm
Propeller : 8*6 Slowfly
Wing: span -69 cm chord-22.5 cm
Building material : Depron, HotGlue
Flying characteristic : Superb!
Beginner easy to fly model.
Colour scheme: yet to decide  

Maiden video ?
Also please rotate the pic by 90° CW

Also sir can you please post close ups of  the motor mount n landing gear  , what's the material used for landing gear ?

it look like a ft tiny trainer 

Any reinforcement for wing ?

@Tanmay, since only 225gm , it doesn't need.

@a3ruz, landing gear= pushrod bent , attached to (screws)a plastic (credit )card , large enough to cover the bottom of fuselage, so that the impact of landing is evenly distributed without damage.
Motor mount= Motor attached to a square piece of balsa wood( strengthened by feviquik drops & then covered with Sellotape) with screws and then hot glued to fuselage.

Thank you sir

nice low cost rc plane.