Text only | Text with Images

RC India

General Topics => Beginners Zone => Topic started by: satishjohnbosco on October 21, 2013, 02:42:08 PM

Title: Sky Surfer V2 Build Help Needed for vtail or T tail
Post by: satishjohnbosco on October 21, 2013, 02:42:08 PM
HI,

I got my new wings Sky Surfer V2.. before I proceed to build I have a question. Is there a way not to glue the V Tail or T Tail to the Body like Easy Star.

Please help since I travel a lot cannot fix the tail permanently difficulty transporting it.
Title: Re: Sky Surfer V2 Build Help Needed for vtail or T tail
Post by: pravesh736 on October 21, 2013, 03:20:00 PM
yes, u can remove some foam and insert 2 nuts into the bottom of vertical stabilizer and glue those, 2 screws through the bottom side of fuse at tail. just use something like a big washer to protect foam from collapsing. use 5mm plastic screws and nuts.
Title: Re: Sky Surfer V2 Build Help Needed for vtail or T tail
Post by: satishjohnbosco on October 21, 2013, 03:29:29 PM
Any plastic screw and nut available...
Title: Re: Sky Surfer V2 Build Help Needed for vtail or T tail
Post by: manojswizera on October 21, 2013, 04:02:39 PM
You can also put, double sided foam tape. and put some hot glue at contact of boom and tail part.
later if you want , hotglue came out easily.
the double sided foam tape hold on strongly, i have done the same.
but get a good quality foam tape.
Title: Re: Sky Surfer V2 Build Help Needed for vtail or T tail
Post by: satishjohnbosco on October 21, 2013, 04:25:55 PM
Thank you very much...will try the same.
Text only | Text with Images